Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

265/75's on Rangie

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 35
Joined: Tue Jun 28, 2005 9:53 am
Location: Melbourne

265/75's on Rangie

Post by Vogue »

Hi i want to fit 265/75-16's on my '89 Rangie. It has a 2" lift. Will the rub on the body etc. Some say yes, others say no. Has anyone got this size on a rangie? Do you have any pictures would be great . Thanks
Top
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

on standard offset alloy rims you should be ok. they might rub abit at times but shouldnt be anything to major :D
Top
Posts: 71
Joined: Mon Jun 28, 2004 1:03 pm
Location: Canberra

Post by A*D*A*M »

I've got 265/75 cooper ST with the origional alloys on my 93 Rangie. Its got about 1.5 - 2 inches of lift, no body lift. The front end is too stiff and doesn't articulate well. No Rubbing to date but most of my 4x4 work has been on Straddie and Fraser Islands and up around Rainbow beach so not a lot of wheel articulation required.

The major drama is how big my turning circle is now after adjusting the steering stops to keep the tyres from rubbing. A bit slower acceleration and uses more fuel around town too. Will be better once I change diff ratio (Toyota centre swap??).

Hope this helps,
Adam.
'92 GQ

Hopefully more reliable than my rangie...
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 0 guests