Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Rocky Rock Sliders/side steps

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Forum rules
Post Reply
Posts: 8556
Joined: Mon Jun 13, 2005 9:34 pm
Location: Sydney

Rocky Rock Sliders/side steps

Post by RockyF75 »

Ok, went down to Maquarie 4x4 to get quote for sum sidey's on my rocky, subsequent estimate, after 30secs with the tape weasure :roll: , "yeah, about $1200"... anyway, after i stoped rolling around laughing I picked my self up from the floor, and said "I'll have to ring around and might get back to ya's" (yeah, rrrite :D ) sooooo, after searching through the contacts list, found a friend who can weld, and also found out he has spare steel lying around... looks like end price will be bottle/case of watever i get him in appreciation. :D

Here's the pics about 80% done, just gotta weld it up, paint it and attach to chassis. Woooohoooo, suck on that $1200 quote :armsup:
:D :D :D

Image
Image
Image
You can see one of the old alloy ones that took a bit of a bashing :D
PS, to the defence of the 4x4 place, theirs looked bling as, but thats not what i want em for :twisted: lol
Hopfully will finish em tomorroe and will post up final pics, along with sum dimensions and any other useful info i can think of, so if any other rocky owners wanna make their own, might atleast help a bit.
60 + Turbo, 33"s :armsup:
Top
Posts: 1240
Joined: Wed Apr 28, 2004 7:06 pm
Location: right behind you watching, waiting

Post by flynn »

i take it ur just going to weld those straight on to the chassis???
i reakon id do the same thing exept where u weld it on the chassis id have a square plate about 20mm bigger on the ends(sorta like feet) just to have a better connection.
looks good though alot cheaper than the bling ones!!!
Team Rock Solid -M.Flynn
rolux: Out of money and looking for sponsers

If there's a will, there's a four wheel drivers way.

http://www.outerlimits4x4.com/viewtopic.php?t=78397
Top
Posts: 8556
Joined: Mon Jun 13, 2005 9:34 pm
Location: Sydney

Post by RockyF75 »

nah, not welded to chassis. Welded to a metal plate, which is bolted to another metal plate on other side of chassis... will post up piccys later as can't finish em till next week now :cry: . Went to engineering place and wanted $90 for 24 bolts :shock: ... they were overkill but still seemed expensive, got sum cheaper ones from auto pro but still supposed to be pretty strong, grade 8 high tensile the guy said. I have no idea what grades what so ne1 here know if that is good?? :D
60 + Turbo, 33"s :armsup:
Top
Posts: 264
Joined: Tue Aug 17, 2004 6:14 pm
Location: The Hague, Netherlands

Post by elgordomuygrande »

With 12 bolts each side that should be sufficient.

A grade 8 M10 bolt pulls more than 5 tons until it permantly deforms, so 12 each side will do the trick :lol:

Cheers
smokin' is bad, especially for your curtains

----------------------------------------------------------
F20 Resin Top, 2.5" lift , 31" Grabber AT's
Top
Posts: 106
Joined: Thu Mar 31, 2005 8:07 am
Location: melbourne, victoria, Australia

Post by Chris F20 maniac »

thats nice to know!
cause i was wondering if my rear bar attachment was going to be strong enough.

i used 4, 8.8 ton M8 high tensile bolts

im sure it will be right now!!! :lol:
81' 2 door rangie 4.4l V8
ROCK 'N' ROLL AINT NOISE POLLUTION!
Top
Posts: 1240
Joined: Wed Apr 28, 2004 7:06 pm
Location: right behind you watching, waiting

Post by flynn »

i cant remember but isnt high tensile bolts the ones that if you use improperly will snap really easily??? or is that a different type???
Team Rock Solid -M.Flynn
rolux: Out of money and looking for sponsers

If there's a will, there's a four wheel drivers way.

http://www.outerlimits4x4.com/viewtopic.php?t=78397
Top
Posts: 264
Joined: Tue Aug 17, 2004 6:14 pm
Location: The Hague, Netherlands

Post by elgordomuygrande »

I used this as a reference and then roughly calculate the cut surface of a bolt. To my knowledge using bolts improperly would only occur when you tighten them beyond the yield strength which causes them to break. I think the type of bolt you mention is stainless steel hardware. But then again, I'm no expert :lol:
You do not have the required permissions to view the files attached to this post.
smokin' is bad, especially for your curtains

----------------------------------------------------------
F20 Resin Top, 2.5" lift , 31" Grabber AT's
Top
Posts: 1240
Joined: Wed Apr 28, 2004 7:06 pm
Location: right behind you watching, waiting

Post by flynn »

it can only be used for pushin/pullin or somthin
i know u cant use it on ur trailer because it moves sides ways too much
i think sideways movement causes it to snap
its only strong in one direction, but like it matters for sliders
Team Rock Solid -M.Flynn
rolux: Out of money and looking for sponsers

If there's a will, there's a four wheel drivers way.

http://www.outerlimits4x4.com/viewtopic.php?t=78397
Top
Posts: 8556
Joined: Mon Jun 13, 2005 9:34 pm
Location: Sydney

Post by RockyF75 »

FINALLY, finished em off. Still needs some tweaks like one backing plate doesnt fit in behind the chassis rail, but its strong as with only 2 of the arms bolted to the chassis.

Image

Image

Will also put sum rubber between the door sils and the sliders soon. Sory for the HUGE piccys :D
60 + Turbo, 33"s :armsup:
Top
Posts: 1595
Joined: Tue Dec 02, 2003 4:11 pm
Location: Warner, Brisbane Nth

Post by Spartacus »

is that allo checkerplate :shock:
u reckon alla-min is strong enoungh not to buckle n bend?
MULL
Top
Posts: 8556
Joined: Mon Jun 13, 2005 9:34 pm
Location: Sydney

Post by RockyF75 »

Spartacus wrote:is that allo checkerplate :shock:
u reckon alla-min is strong enoungh not to buckle n bend?
U mean in the 1st pics or the last pic?? 1st pics are of old crappy alloy side steps(which are now gooone), the last pic the backinglate is chequerplated steel, about 7mm thick :D might look a bit like alloy in the pic cuz of greyish primer, and the camera flash
60 + Turbo, 33"s :armsup:
Top
Posts: 1595
Joined: Tue Dec 02, 2003 4:11 pm
Location: Warner, Brisbane Nth

Post by Spartacus »

primer eh...

yeh diahatsu ones are pretty shockin considerin there fixed to the
plastic front guards

good stuff
MULL
Top
Posts: 1240
Joined: Wed Apr 28, 2004 7:06 pm
Location: right behind you watching, waiting

Post by flynn »

yeh diahatsu ones are pretty shockin considerin there fixed to the
plastic front guards


id have to agree with that i try to limit my side steps to only one person on them at a time.

BUT THE LITTLE A'HOLES WONT LISTEN!!!
Team Rock Solid -M.Flynn
rolux: Out of money and looking for sponsers

If there's a will, there's a four wheel drivers way.

http://www.outerlimits4x4.com/viewtopic.php?t=78397
Top
Posts: 1240
Joined: Wed Apr 28, 2004 7:06 pm
Location: right behind you watching, waiting

Post by flynn »

heres my side steps(they're worse in real life :D )
You do not have the required permissions to view the files attached to this post.
Last edited by flynn on Mon Sep 19, 2005 5:56 pm, edited 1 time in total.
Team Rock Solid -M.Flynn
rolux: Out of money and looking for sponsers

If there's a will, there's a four wheel drivers way.

http://www.outerlimits4x4.com/viewtopic.php?t=78397
Top
Posts: 8556
Joined: Mon Jun 13, 2005 9:34 pm
Location: Sydney

Post by RockyF75 »

flynn wrote:heres my side steps(they're worse in real life :D )
Image


:D :D :D My pictures work :armsup:
60 + Turbo, 33"s :armsup:
Top
Posts: 1240
Joined: Wed Apr 28, 2004 7:06 pm
Location: right behind you watching, waiting

Post by flynn »

RockyF70 wrote:
flynn wrote:heres my side steps(they're worse in real life :D )
Image


:D :D :D My pictures work :armsup:

cram that up ur cram hole cramy!!!
meh good ol paint never lets u down even if the quality aint that great
Team Rock Solid -M.Flynn
rolux: Out of money and looking for sponsers

If there's a will, there's a four wheel drivers way.

http://www.outerlimits4x4.com/viewtopic.php?t=78397
Top
Posts: 1595
Joined: Tue Dec 02, 2003 4:11 pm
Location: Warner, Brisbane Nth

Post by Spartacus »

o yer :lol: ...heres a pic of my sidesteps














:finger: nice won stupid
MULL
Top
Post Reply

Return to “Ford / Mazda / Daihatsu / Homeless”

Who is online

Users browsing this forum: No registered users and 0 guests