Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

g16b into a sierra won't start

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 11
Joined: Sun Sep 04, 2005 3:59 pm
Location: Perth, Western Australia

g16b into a sierra won't start

Post by 1600zook »

This may be little long winded, but if someone knows what I am on about, it should make sence.

I have just thrown a G16B into a sierra. I have integrated the 16B wiring harness into the sierra as best as I can tell.

* I can crank (the engine)
* I have spark
* I have fuel to the fuel rail

SHE WONT START!!!!!!!!!!!!

I have got an engine fault code 41 from the ECU. 41 relates to the ignition fail safe circuit, but the serial port at the ECU does not have the wire required.

The workshop manual says I should hve four wires at the ignitor, but I only have three. The plug only has three.

Any ideas?
Top
Posts: 3552
Joined: Wed Apr 14, 2004 9:46 pm
Location: Ormond VIC

Post by muppet_man67 »

the fourth wire is an earth?
[url]http://www.vic.suzuki4wd.com/forum[/url]
Top
Posts: 295
Joined: Tue Dec 02, 2003 7:13 pm
Location: Perth W.A.

Post by Wolverine »

You Farked up :finger:
Nah just kidding dude, have you checked with Pete or Drew they will probably know.
Top
Posts: 11
Joined: Sun Sep 04, 2005 3:59 pm
Location: Perth, Western Australia

Post by 1600zook »

All sorted now...............

Thanks :P :P :P
Top
Posts: 295
Joined: Tue Dec 02, 2003 7:13 pm
Location: Perth W.A.

Post by Wolverine »

Sweeeeeeet! so you have started it up!
Top
Posts: 11
Joined: Sun Sep 04, 2005 3:59 pm
Location: Perth, Western Australia

Post by 1600zook »

Started it this afternoon..............Kikin Ass Baby!

Turns out that I was using a '92 5 door manual. Slighty different to the '94 3 door that I bought my engine from. There were only a few small differences, but it was enough to confuse me.

If anyone reading this has any wiring type questions related to EFI on a MPI 1600 Vit engine, ask away as I now have the best part of two manuals. :P

No exhaust yet,.............sounds great.
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 66 guests