Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

16" 80 Rims with 285's to 75 Ute

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 70
Joined: Wed Sep 21, 2005 7:24 am
Location: Queenton NQLD

16" 80 Rims with 285's to 75 Ute

Post by Joombi »

G'day, I want to put a set of 80 series GXL 16" Rims with 285's on my 92 75 series Ute, are there any problems with the offset or any other problems before I go ahead, any help would be great, Thanks.....
Top
Posts: 101
Joined: Mon Jun 20, 2005 4:38 pm
Location: glenmore park

Post by 75 cruiser »

my mate has the same set with them rims and it has not caused any problems!just they are a little bit more in set then standard rims.
Top
Posts: 70
Joined: Wed Sep 21, 2005 7:24 am
Location: Queenton NQLD

Post by Joombi »

Thanks Mate, I was told by a few people they would hit the calipers but if your mate already has them on & has no trouble, thats proof enough....
Top
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

Rubbing tie rod end.

Post by dogbreath_48 »

I'm trying to put the GXL rims on my '87 HJ75, but they rub the rubber boot on the tie rod end pretty hard (can't spin the wheel by hand)! :bad-words:
Does anyone have any ideas how to overcome this? Also, i run a set of 34" simex (~35") tyres on sunnies without rubbing - is it likely i'll have a problem running 33" tyres on the GXL rims?


...Does anyone want a set of GXL rims? :cry:
Tetanus rolling on 37's
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Re: Rubbing tie rod end.

Post by dow50r »

dogbreath_48 wrote:I'm trying to put the GXL rims on my '87 HJ75, but they rub the rubber boot on the tie rod end pretty hard (can't spin the wheel by hand)! :bad-words:
Does anyone have any ideas how to overcome this? Also, i run a set of 34" simex (~35") tyres on sunnies without rubbing - is it likely i'll have a problem running 33" tyres on the GXL rims?


...Does anyone want a set of GXL rims? :cry:
The offset on the 80 series rim is all wrong for a 75....and the steering arms will rub....better to get 16x8 sunnies 3.5 inch backspace.
Andrew
Top
Posts: 343
Joined: Fri Mar 19, 2004 8:19 pm
Location: Lalalty NSW (or is that VIC?)

Re: Rubbing tie rod end.

Post by HIL01X »

dogbreath_48 wrote:

...Does anyone want a set of GXL rims? :cry:
Yep.
Where are you and how much?
Allways been a TOYOTA man.
Now I'm old and grumpy as well.
Top
Posts: 70
Joined: Wed Sep 21, 2005 7:24 am
Location: Queenton NQLD

Post by Joombi »

I ended up opting for keeping my 15" sunnies & fitting 32x11.5 15R MTR's, not as much noticable drop in power than 33's & still looks better than the 31's
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 128 guests