Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

pajero springs

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 80
Joined: Tue Sep 06, 2005 6:24 pm
Location: sydney

pajero springs

Post by eddy 76 »

Hi guys have been reading on here for a while but made no posts. So ihave a NK paj 32' muds bull bar uhf am cb and safari snorkel.Wound the torsion bars up a while ago but just bought new springs and shocks and was wonderin if i will need a spring compressor to get the springs out or if I can undo the shoks and lift the body with a hilift. any help would be great.

cheers eddy[/img]
Top
Posts: 1130
Joined: Thu Nov 18, 2004 7:25 pm
Location: New Zealand

Post by NJV6 »

Yep bang on, no need for a compressor, take the bottom bolt out of the shocks then like you say lift the body/chassis and lower the axle with a trolley jack with the wheel off.
You mau need to disconnect your anti roll bar as well, I already had mine off when ti came to change springs so it didn't limit things.

NJ
1994 NJ SWB, 3.5, 5 speed manual, 33's, XD9000, 4.9 diffs, Front & Rear ARB's, Safari Snorkel

2008-2009-2010-2011 Pavlova in the shed.
Top
Posts: 80
Joined: Tue Sep 06, 2005 6:24 pm
Location: sydney

Post by eddy 76 »

thanks thought so but feel better abut it when someone has already done it

cheers eddy
Top
Posts: 1046
Joined: Sun Dec 12, 2004 11:24 pm
Location: ACT

Post by Zute »

Watch the brake hose, dont want to stretch it to much. And you may need to disconnect the Pannard bar at one end. Oh and undo the handbrake cable where it connects to the suspension arm. I havent had to discnnect the swaybar, but my bushes are quite worn.
I have heavy/lift springs , but when I have them fitted I cant fit the car in the garage. So I only fit them if I think I really need them. Takes me about 40 minutes theses days.
'2001 Disco td5
'90 Maruti Ute 1Ltr Lwb

Experience is something you don't get, until just after you need it.
Top
Posts: 12
Joined: Tue Aug 16, 2005 8:24 am
Location: Brisbane

Post by mrbitchi »

Be safer to put the vehicle up on chassis stands and then lower the axle, rather than raising the vegicle with a Hi-Lift. Imagine slipping off the Hi-Lift with the axle unbolted.... :bad-words: :bad-words: :bad-words:
John
NM GLS
Top
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

thats how i did mine.
put the car on stands and then lowered the diff with a trolley jack
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Top
Posts: 80
Joined: Tue Sep 06, 2005 6:24 pm
Location: sydney

Post by eddy 76 »

springs and shocks all done not to bad either thanks for your tips

cheers eddy
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 20 guests