Just installed an ELV socket in the rear of my GQ running off the 2nd battery. I'll be making up a 'socket box' to plug into it.
Can anyone tell me which of the pins should be connected to +ve and which to -ve? There are no markings on them.
The two pins are positioned like a 'T'.
I know that I can just wire my plug to suit but I want to ensure I get it the right way round by proper convention.
Cheers
Baz
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
ELV socket wiring
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Cheers Little Lux
Thanx mate.
I guessed as much, but wanted to be sure.
Baz
I guessed as much, but wanted to be sure.
Baz
Dunno about you guys, but the standard we've always adhered to here in VIC is TOP = minus = -ve
Vertical = +ve.
Not a HUGE issue, so long as you stick to the same with all your equipment and ALWAYS check what polarity other people might use on theirs if you're plugging somebody elses gear in.
Vertical = +ve.
Not a HUGE issue, so long as you stick to the same with all your equipment and ALWAYS check what polarity other people might use on theirs if you're plugging somebody elses gear in.
bru21 wrote:What happens in goat, stays in goat!
Who is online
Users browsing this forum: No registered users and 127 guests