This is for a mate.
He has a stock xtra cab Hilux, 1999. He wants to fit 31's with no lift. What offset rims (15x8) should he run to avoid scrubing?
He will wind up the torsion bars 50mm if required but would prefer not to.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Offset Q's
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Offset Q's
[quote="Wooders"]If ya want a 4x4 camry go ahead & buy a Patrol or Cruiser.[/quote]Rangie with 80s LC diffs, Isuzu 4bd1, Twin ARB lockers, 8000lb Hi mount warn, 315x75x16 Procomp XTerrains
This is obviously the IFS?
If you went with a 0 offset this would see it fit as good as it will get.
Better off going with a 15x7 with a 13P (or there abouts) as the tyre won't sit quite as wide and it will keep it a little further away from the floor pan/ back of the front guard.
Still need to wind the torsion bars....
Cheers,
Ryano
If you went with a 0 offset this would see it fit as good as it will get.
Better off going with a 15x7 with a 13P (or there abouts) as the tyre won't sit quite as wide and it will keep it a little further away from the floor pan/ back of the front guard.
Still need to wind the torsion bars....
Cheers,
Ryano
Who is online
Users browsing this forum: No registered users and 3 guests