Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Front Pully Bolt

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 28
Joined: Fri Aug 27, 2004 11:29 am
Location: Sydney

Front Pully Bolt

Post by Nigel »

Hi to the forum
Does any one know how to stop the crankshaft from rotating whilst trying to undo the front pully bolt of my AUTOMATIC td42.

Thanks in advance.

Regards
Nigel
Top
Posts: 533
Joined: Sat Jan 15, 2005 4:54 pm
Location: Melbourne, Australia.

Contact:
Contact InSanE

Post by InSanE »

the best way to remove the bolt is to get a big breaker bar and wedge it somewhere secore opposite to engine rotation and crank the engine a bit and it should crack the nut very easy to do if you understand me, use the startor motor to undo the nut.
GQ LWB TD42, boost, lockers etc

http://forum.mudrhino.com.au/viewtopic.php?t=262&start=30
Top
Posts: 625
Joined: Fri Feb 20, 2004 12:04 am
Location: Melbourne

Post by Woop »

OR--remove starter motor and put a wedge in flywheel to prevent rotation.

Nick
Top
Posts: 677
Joined: Mon Nov 18, 2002 10:00 am
Location: Melbourne

Contact:
Contact roly

Post by roly »

Woop wrote:OR--remove starter motor and put a wedge in flywheel to prevent rotation.

Nick
like a big flat blade screwdriver in a tooth
08 340kw HSV Maloo 6.2L
John Roly
Melbourne Again
Top
Posts: 542
Joined: Wed Apr 28, 2004 10:28 am
Location: pomona,sunshine coast

Contact:
Contact GRINCH

Post by GRINCH »

InSanE wrote:the best way to remove the bolt is to get a big breaker bar and wedge it somewhere secore opposite to engine rotation and crank the engine a bit and it should crack the nut very easy to do if you understand me, use the startor motor to undo the nut.
make sure you disconect the ignition system or injector pump to prevent the motor from firing.
Top
Posts: 533
Joined: Sat Jan 15, 2005 4:54 pm
Location: Melbourne, Australia.

Contact:
Contact InSanE

Post by InSanE »

it doesnt realy matter if it fires just turn it off quickly wont do any harm on a td42 i have removed 100's of balancer nuts that way without a problem. it is the easiest and most hassle free way to do it
GQ LWB TD42, boost, lockers etc

http://forum.mudrhino.com.au/viewtopic.php?t=262&start=30
Top
Posts: 109
Joined: Thu Aug 26, 2004 9:45 pm
Location: SE Melbourne, Australia

Contact:
Contact rlaxton

Post by rlaxton »

Wouldn't it be safer to just use an impact wrench? Either an air or even one of those 12V electric types would remove the nut easily without risking damage to abything.

Richard.
Top
Posts: 533
Joined: Sat Jan 15, 2005 4:54 pm
Location: Melbourne, Australia.

Contact:
Contact InSanE

Post by InSanE »

yea thats fine if u want to pull the radiator and condensor out to get a rattle gun in there its simple and easy to use the starter and braker bar
GQ LWB TD42, boost, lockers etc

http://forum.mudrhino.com.au/viewtopic.php?t=262&start=30
Top
Posts: 28
Joined: Fri Aug 27, 2004 11:29 am
Location: Sydney

Pully Bolt

Post by Nigel »

Thanks to every ones help.
I kicked it over with the socket and breaked bar and that did the trick.

Regards



Nigel
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 0 guests