Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Which gearbox to use...?

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 178
Joined: Sat Jan 14, 2006 3:14 pm

Which gearbox to use...?

Post by beaver700 »

Gday fellas,


Another question, this time about gearboxes. The gearbox in my sierra is on its way out :shock: ... so I was wondering if I could find some sort of replacement.... What I was after is another suzuki gearbox which would require the least amount of effort and mod to put in. I realise there will be some.
Has anyone gone about putting a different gearbox in their sierra. If yes, what sort?


I know I am asking alot of questions, I just want to get the best of my little zook! :lol:


Cheers
Posts: 28
Joined: Sun Dec 12, 2004 9:23 pm

Post by przooker »

u should also mention that u r putting a swift gti motor in ur zook, cause of the clutches, etc.
zook comming soon......
Posts: 178
Joined: Sat Jan 14, 2006 3:14 pm

Post by beaver700 »

As przooker said, I am putting a gti swift engine in as well, so what gearboxes would match this conversion?


Cheers

PS: Thanks przooker :)
Posts: 3098
Joined: Sat May 28, 2005 3:22 pm
Location: Melbourne, Australia

Post by PJ.zook »

I know its vague but you can put almost any gearbox you want in it with the right bellhousing adapter.
Posts: 178
Joined: Sat Jan 14, 2006 3:14 pm

Post by beaver700 »

Thanks,

I suppose I will start to shop around for gearboxes... :D

Cheers
Posts: 20
Joined: Sat Oct 09, 2004 1:42 pm
Location: brisbane

Post by aodhfin »

i suggest that as well as searching for gearboxes you also double check if they require an adaptor, what sort and if you can buy it ready made otherwise you might end up being quoted $10-$15k for an adaptor to be specailly made for you. i would call graeme at suzi sport or one of the guys off this board like mud4b to see what conversions that they have done. also here is a site http://home.iprimus.com.au/pulsr/g13b/ i believe one of the guys on here know him. good luck i hope the link helps you.
Suzisport Springwood
Century Batteries
Sylverkey
Extreme Coatings
Control Synergy
Post Reply

Who is online

Users browsing this forum: No registered users and 28 guests