Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Flow rates?

Tech Talk for Rover owners.

Moderator: Micka

Post Reply
Posts: 1006
Joined: Wed Jan 07, 2004 8:25 pm
Location: Strapped into the Evil!

Flow rates?

Post by BIg StEvE »

Need to replace my standard fuel pump as it has died. Any one know what flow rate im looking for in an aftermarket electronic fuel pump? It has to run the 3.9 with standard twin carbies.

If anyone recomends what they are using let me know!

cheers

steve
Posts: 1119
Joined: Wed Apr 14, 2004 10:03 am
Location: Melbourne, looking at the hills for snow

Post by LOCKEE »

My Landy had first MQ electric pump then a Carter pump as a replacement because the little facet ones didn't last long but both needed a fuel regulator to restrict pressure to carbies.
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

Steve, just get a replacement pump from repco or similar. How do you know its died ? have you checked all the connections, i have never had a problem in 12 years and 270k.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Post by cloughy »

If you have 12v to the pump try giving a bash with tapometer, its very rare that the liitle solid state pumps die, but quite common to jam. you can also disassemble them and clean out the sludge
Wanted: Car trailer or beaver tail truck, let me know what you got
Posts: 425
Joined: Sun Jan 16, 2005 10:42 pm
Location: Melbourne

Post by walker »

"Tapometer" :P :P :P :P :P
Thanks,

Adam
Posts: 1006
Joined: Wed Jan 07, 2004 8:25 pm
Location: Strapped into the Evil!

Post by BIg StEvE »

Thanks guys but i was having to tap it way too often so i ripped it off now im looking for one that i can be confident it wont let me down. Something low pressure and high flow!
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

If you only need to tap it to get it working there cant be much wrong with it.
Repco sell a replacment for about $140 but there will be others cheaper.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Posts: 463
Joined: Sun Nov 21, 2004 10:15 pm
Location: Kingston,Hobart, Tasmania

Post by justinC »

Try a Mazda 929 REAR WHEEL DRIVE MODEL sedan at the wreckers, under the fuel tank under the boot floor, there is a plate. Remove this plate and there is a facet type fuel pump and filter assembly on a bracket. most wreckers want about $40 for it. I send my Tdi owner customers off to the mainland with a spare one of these in case of a lift pump failure.

JC
'92 Rangie Sherwood/turbo intercooled isuzu4BD1 /ACE/ full leather/2.5" exh/2.5" body lift/DeCarbon shocks/LR tanks/LT95 back in and OK now, Sals conversion soon...
Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests