Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

turbo mods

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 111
Joined: Wed Jun 15, 2005 10:44 am
Location: yinnar south

turbo mods

Post by mopar rangie »

has anyone played with a turbo on a td5.from what i read people upgrade chips,coolers and exhausts.doing this seems to move the power up the rev range a bit.by changing the turbine wheel or the compresser or both you could get the turbo to work better at lower speeds.then tune the ecu to suit this. the loss of top end power should be small but the bottom end power and turbo spool up would over shadow any loss up top. if i had the coin it would be good to look into.
smooth rides with power
Top
Posts: 3288
Joined: Sun Feb 02, 2003 10:15 pm
Location: Central West NSW

Contact:
Contact Slunnie

Post by Slunnie »

Does chipping lose power in the lower revs? I have an auto so cant comment under about 1900rpm or so, but it pulls hard everywhere in my case.
Cheers
Slunnie

Discovery TD5, Landy IIa V8 ute.
Top
Posts: 1
Joined: Sun Feb 26, 2006 8:10 am
Location: Melb

Post by kubota130 »

mine seems to pull hard at low end speed

bigger exhaust and chip

manual TD5 Fender
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 7 guests