ok guysa it driving me nut now and causing some problems while driving
any idea on a prices for master clyinder without sevo as mine works fine and a secondary clyinder????????
matt
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
clutch master
clutch master
1995 land rover disco on 265 muddies
Matt
Theres a thread around here somewhere about rebuilding them.
I got mine done on my old GQ SWB TD42. Didnt cost that much and was easy to do. I brought a piston rebuild kit from Nissan=$50(approx) and had the cylinder honed and re-sleved with a stainless sleve for about 40-50bucks. And did the removal and install myself.
Only problem I had was undoing the pipe fitting. I needed one of those ring spanners with what looks like a bit cut out.
Theres a thread around here somewhere about rebuilding them.
I got mine done on my old GQ SWB TD42. Didnt cost that much and was easy to do. I brought a piston rebuild kit from Nissan=$50(approx) and had the cylinder honed and re-sleved with a stainless sleve for about 40-50bucks. And did the removal and install myself.
Only problem I had was undoing the pipe fitting. I needed one of those ring spanners with what looks like a bit cut out.
THOUGHT FOR THE DAY....
ok after putting a new secondary clyinder and did the master cylinder its going great now,
my new problem is the motor suposed to be runing when you bleed the clutch ?????????
as it is i bleeded clutch without running i know the servo works fine but whats happerning now is you can change 1-2 clucth is nice and soft no problems but going 2-3-4 clucth become hard, soon as you take it out of gear slowing for the lights clutch becomes soft onces again untill changinh 2-3-4,
all help with be great
my new problem is the motor suposed to be runing when you bleed the clutch ?????????
as it is i bleeded clutch without running i know the servo works fine but whats happerning now is you can change 1-2 clucth is nice and soft no problems but going 2-3-4 clucth become hard, soon as you take it out of gear slowing for the lights clutch becomes soft onces again untill changinh 2-3-4,
all help with be great
1995 land rover disco on 265 muddies
To be honest neither do I, I know that power assist brakes don't need a running engine so I would suspect not. These last 15 years or so who knows what complicating technology they added.
In the GUs I understand there is an inline one way air valve looks like a snake swallowed a rat so I have been told. If it fails then vacume can play up. Think it would be on a GQ also.
How many pumps do you get at a fast idle in neutral?
In the GUs I understand there is an inline one way air valve looks like a snake swallowed a rat so I have been told. If it fails then vacume can play up. Think it would be on a GQ also.
How many pumps do you get at a fast idle in neutral?
*JUST LUV IT* 96 GQ LWB TD4.2, Cav, Kings, Dobinsons, Motorguard, Enginesaver, 400 pro, Cooper ST's (rolls eyes), fleetguard oil filters, Delo 400 engine oil, Delo ESI gearbox oil and an RTC.
Who is online
Users browsing this forum: No registered users and 3 guests