Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

For all you 3L V6 owners

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 43
Joined: Mon May 09, 2005 4:54 pm
Location: Newcastle

For all you 3L V6 owners

Post by meminiau »

Hi there,

A long time ago I asked here about the idler pulleys that tension the belt for the alternator, etc.

Someone replied and stated that they thought that the air con pulley from an EA falcon would work, so long as it has a spacer behind it.

Well.... today after many many months of putting up with the noise, I replaced one of them. Though the falcon part wouldn't work. It is similar to the mitsu part, but the centre diameter is too large.

Anyways, I didn't get that part, but instead got a Hyundai part which is the same, but half the price as the correct part. If anyone wants the part number, let me know.

Now though, I have another noise, which is pretty much the same as the one I was trying to stop. Could it be my waterpump? Am I able to pump some grease into it?

dean
Top
Posts: 62
Joined: Mon Sep 20, 2004 11:19 am
Location: Sydney

Post by Locknut »

no you cant put grease in the water pump,there is a hole in the top near the pulley i dont know what its there for but maybe some wd40 in there mite help,if you are going to all the trouble and effort to get to the water pump to put grease/wd40 in it you mite as well change the bugger.
What is the part number for that pully????
Gav
Top
Posts: 1046
Joined: Sun Dec 12, 2004 11:24 pm
Location: ACT

Post by Zute »

Dont think wd40 would be a good idear. Will only thin out any lub still in it.
Sure the noise isn't just the belt ?
I thought my pullies were stuffed, turned out to be the belt.
'2001 Disco td5
'90 Maruti Ute 1Ltr Lwb

Experience is something you don't get, until just after you need it.
Top
Posts: 203
Joined: Thu Sep 25, 2003 11:28 pm
Location: Rowville. Melbourne

Post by Allan Mac »

Had a similar problem/noise a week or so ago, & it turned out to be the power steering pump, even though it still worked fine. Still expensive to replace, but not as much as a new water pump.

Cheers
Allan Mac
Top
Posts: 11
Joined: Wed Feb 15, 2006 10:46 am
Location: Midland

Post by MuNches »

I continue to have squeaking noises coming from my air-con pump when it is engaged. However spraying a nice amount of CRC on it keeps it quiet for a couple of weeks.
Top
Posts: 43
Joined: Mon May 09, 2005 4:54 pm
Location: Newcastle

The details

Post by meminiau »

Hi

Sorry for taking so long to do this...

The part was bought from Pep Parts
It's made by Partech and is listed as a Timeing Belt Tensioner.
The part number on the box is PBT90
It does actually say on the box that it is for a Hyundai + Mitsubishi

If the number is wrong, let me know. I still have the box, which does have some more numbers, but I think the one quoted is correct

dean
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 4 guests