Well, after getting my new 35x10.5x15 ETs on, I decided to go test them and push the limits of my truck before I justify any Maxi-Drive components (that are going to be my X-Mas gift to me).
Highlights are great articulation allround with the 2" OME lift, 2" body lift, and Rangie Spares flares...however, I need to extend my rear bump-stops some 2-3" more.
The tires are a MASSIVE improvement over the 32" TSLs I was running.
Here are Some pics:
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Day 3 Outing
Moderator: Micka
Day 3 Outing
LR Disco truggy:
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
Got to a sweet looking pond. This is September, so if there is still water in this, that means the ground is STICKY! Needless to say, we got stuck (no front ARB)
LR Disco truggy:
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
After trying to drive out and breaking a front short-side axle, then using the pull-pal which got bent, we tried to hammer a steel pole we found lying loose into the ground as an anchor:
LR Disco truggy:
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
The "home-made" anchor before and after.
FYI: I had to call a friend of mine that is working in construction to get a 6 wheel drive truck to recover me. When that was not able to find traction, we had to use my M8274-50 with a snatch block to get me out. Great Winch.
FYI: I had to call a friend of mine that is working in construction to get a 6 wheel drive truck to recover me. When that was not able to find traction, we had to use my M8274-50 with a snatch block to get me out. Great Winch.
LR Disco truggy:
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
Who is online
Users browsing this forum: No registered users and 0 guests