Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

60series weird grinding sound...

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 606
Joined: Fri Jun 10, 2005 6:48 pm
Location: Victoria

60series weird grinding sound...

Post by vanzbrown »

Hi...

Have noticed since early this week that when im under load (under acceleration), and put it into 4th gear there is a weird sound, perhaps coming out of the gearbox. This continues into 5th, but none of the other gears. Take foot off the gas, and it goes, put it back on, back it comes. Hard to describe the sound... Kinda like like a loose wobbly knocking vibrating sound. Everything still runs, fine, just wanted to know if this sounds familiar, have had a bit of a search, but no luck...
Posts: 568
Joined: Fri Jan 10, 2003 6:38 pm
Location: Darwin

Post by Sixty »

could be a diff.....wheel bearings.....t/case or g/box brgs.....

Checked your oil in the diffs and or t/case & g/box recently?
Luv the sound of a diesel,
especially a Chev 6.2!
Its GONE.........Replaced by a qik HDJ105.

The bigger the boy, the bigger the TOY!!
Posts: 6693
Joined: Mon Feb 09, 2004 10:13 pm
Location: Newcastle

Post by high n mighty »

Is your rear pinion seal leaking?

How are your rear uni's?
[quote="fool_injected"]
I pity my brother when she is a teenager[/quote]
Posts: 211
Joined: Mon Aug 30, 2004 12:44 pm
Location: "the shire"

Post by quick60 »

It could be, but don't quote me, the idler shaft in the transfer box. 60's have a habbit of wearing these out, and they aint cheap to replace. I'd suggest draining the oils out of the box and transfer and see how much metals in it. If it is in the transfer, I think Don Kyatt has a replacement kit at a reasonably good price.
Damian.

should I swim it first ?
Posts: 606
Joined: Fri Jun 10, 2005 6:48 pm
Location: Victoria

Post by vanzbrown »

Cheers Guys,... Will check out the Transfer case on the weekend. Was going to do the engine oil/filters anyways...

Fixed Front/rear pinion seals about 6mths ago, Both diffs have had the oil replaced not so long back.

Tail shaft doesnt feel loose, but has about 1/2 turn movement(backlash?)

Listenening today, its does sound gearbox/transfer case. Was going about 100kms down a hill today, just rolling, it sounds normal, as soon as i press down on the accellerator, and the engine speed pics up, its starts banging again...

Appreciate the comments guys... Helps alot.
Leeroy.
Posts: 6221
Joined: Tue May 31, 2005 12:51 pm
Location: Sydney

Post by v840 »

When the idler shaft bearing went in my 40 it was more of a whining sound than a grinding. Not sure about the actual idler shaft though.
|^^^^^^^^^^^^^^| ||
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests