Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
increasing flex
Moderator: -Scott-
increasing flex
Hi, i'm looking for a way to increase flex at rear. Gen 1 Pajero with leafs. Any help is welcome. Currently i have the OME kit for 2" lift. It's not bad but i'm looking for a solution with more articulation...
yeah great to see more gen ones,
flex can depend on the thickness of the leafs, ie heavy duty ones will not flex as well as lightduty ones,
have you tried getting extended shackels, they allow the leafs to sit flater and thus there is move flex as they get to their max curve, also u could try drop shackels as they are like extended shackels and allow the leafs to twist and flex better.
hope this helps
flex can depend on the thickness of the leafs, ie heavy duty ones will not flex as well as lightduty ones,
have you tried getting extended shackels, they allow the leafs to sit flater and thus there is move flex as they get to their max curve, also u could try drop shackels as they are like extended shackels and allow the leafs to twist and flex better.
hope this helps
Real men smoke clutches
86' Pajero
2" OME, steel bar goodness, MTZ's, Exxon Valdez-esk fuel consumption
86' Pajero
2" OME, steel bar goodness, MTZ's, Exxon Valdez-esk fuel consumption
increasing flex
Ncpaj, thanks. I alreaedy have longer shackles. Question is that the shock absorbers have a limited length. So, in order to have longer shackles etc. these must be longer too. Does someone knows something about longer absorbers that are good for Gen 1???
test the max flex you get before you start lifting your wheel up measure the distance between the bottom of the wheel and the start of the wheel arch.
then take out your shocks and try it again - if your shock are limiting your flex you will be able to tell.
also some shops you could buy shock abosrber extensions, this is a cheap way of keeping your old shocks and getting max flex (if it is the shocks stopping the flex)
then take out your shocks and try it again - if your shock are limiting your flex you will be able to tell.
also some shops you could buy shock abosrber extensions, this is a cheap way of keeping your old shocks and getting max flex (if it is the shocks stopping the flex)
Real men smoke clutches
86' Pajero
2" OME, steel bar goodness, MTZ's, Exxon Valdez-esk fuel consumption
86' Pajero
2" OME, steel bar goodness, MTZ's, Exxon Valdez-esk fuel consumption
unbolt your shock on the flex side and then flex her up and measure what size shock you are after. I should be able to find something close for you.
Do you have a stiff ride at the moment, can you afford to lose one of the middle leafs. This will help with flex but the springs are then more prone to sagging.
Try pulling the leaves apart maybe and make sure the surface between the leaves are nice and smooth with less friction.
Do you have a stiff ride at the moment, can you afford to lose one of the middle leafs. This will help with flex but the springs are then more prone to sagging.
Try pulling the leaves apart maybe and make sure the surface between the leaves are nice and smooth with less friction.
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
increasing flex
Thanks guys, that is what i had in mind to do, but considering that my suspension is an OME kit i believe they already matched absorber's length and leafs flex ...
Pajero '87 soft top, 2.6L turbo EFI mod, ARB locker, 2" lifted OME, 31's M/T
increasing flex
sway bar at rear in Gen 1??? No such thing Hudson 44 
In front i have send it away a long time ago...
In front i have send it away a long time ago...Pajero '87 soft top, 2.6L turbo EFI mod, ARB locker, 2" lifted OME, 31's M/T
Re: increasing flex
no such thing in a Gen 1 on leaves.....Gen 1 on coils is a diff storyconstapa wrote:sway bar at rear in Gen 1??? No such thing Hudson 44
Andrew
1989 NG Superwagon
1989 NG Superwagon
Who is online
Users browsing this forum: No registered users and 3 guests