Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
hi all i hav a 92 hilux with shagged old man emu 50mm lift springs wich are at the state of bending so fare backwards there about to snap(look like a big WAVY W. ) ... decided it was time for new one so went and brought a new set front and rear and also added some snake racing 2 inch lift shackles
when i took the old front leafs of a compared them to the new ones on the shed floor , the bow and the shape of them was exactly the same exept one is brand new and one is buggged as ...anyways i ignored that and put them on the car anyway and they are not anybetter than the old ones
can any one telll me why the neww ones dont sit in a bow shape as most, but sit absolutely flat no better than the old ones.
can anyone tell me if this is sopposed to be or is somthing definatly wrong
Big thanks to Northern Suburbs Radiators and Melbourne Drive Shafts and Balancing for all your help and support.
thanks plowy i no what you mean but the old ones where definatly buggered and when we put the new 50mm lift ones on they did sit differnently but did not give us any lift at all thanks
Big thanks to Northern Suburbs Radiators and Melbourne Drive Shafts and Balancing for all your help and support.
