Hello this is my first post here and yes i am a newb.
This question probley has been asked a zillion times
so ill apologise for that now.Any way to the point i have
a 1992 model (nh i think ??) with a 3000 v6 thats cactus
(making heaps of odd noises) and was wanting to put a new
engine in it.I was wondering if the 3500 lt engine will fit in or
are mods needed.Any other ideas for a cheap solution would
be much appreciated thanks heaps.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Engine Transplant ???
Moderator: -Scott-
It's "noob" not "newb" - and welcome to OL. 
Yes, 1992 would be NH in Australia - you are here?
I guess the 3.5 engine will fit, but it could get messy. When it was introduced, it came with larger transmission and transfer case, and the factory mounted the body higher on the chassis to provide the necessary clearance.
I don't know if the 3.5 will bolt to your transmission.
If it does, I don't know if you'll need a body lift to allow the engine to fit.
If you fit the 3.5 to your transmission, I don't know if the trans will survive the extra power and torque.
If you merely want more power, consider the 24V version from Triton/Challenger - I don't know what's involved in fitting, but it's basically the same block.
Good luck,
Scott
Yes, 1992 would be NH in Australia - you are here?
I guess the 3.5 engine will fit, but it could get messy. When it was introduced, it came with larger transmission and transfer case, and the factory mounted the body higher on the chassis to provide the necessary clearance.
I don't know if the 3.5 will bolt to your transmission.
If it does, I don't know if you'll need a body lift to allow the engine to fit.
If you fit the 3.5 to your transmission, I don't know if the trans will survive the extra power and torque.
If you merely want more power, consider the 24V version from Triton/Challenger - I don't know what's involved in fitting, but it's basically the same block.
Good luck,
Scott
Who is online
Users browsing this forum: No registered users and 1 guest