Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Hilux low beam not working

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 510
Joined: Fri Feb 04, 2005 7:31 am
Location: Brisbane

Hilux low beam not working

Post by whiteknight »

Mate has just bought a 85 Hilux and we are getting to a stage so he can get a roadworthy.

The parkers work, the highbeam works but no low beam, I have changed the light itself and same result so its not the light. When you twist the light switch to low beam I can hear the relay click from under the bonnet so does that mean that the switch and relay are both operational?

where else can I look?
Top
Posts: 389
Joined: Sun Feb 05, 2006 10:45 am
Location: nsw

Post by dai-hard »

try swap the hi/lo relay over and see what happens.
Top
Posts: 338
Joined: Tue Dec 27, 2005 7:20 pm
Location: QLD Ipswich

Post by 4x4Monkey »

pull the relay out
get a multimeter and put at across i think its 86 and 85 or it will be 30 and 87

either way it should come close to 100ohm if its below say 60ohm then chuck it and buy a new one
Dont worrys There's No Sugar

My 4x4 Is too clean.... Needs a Mud Pack
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest