Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

gearbox questions (transfer case)

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 108
Joined: Mon Oct 17, 2005 10:32 am
Location: Flinders Rangers - South Australia

gearbox questions (transfer case)

Post by ellard »

Hi there all

I am after some information from the forum.

I want to convert my vacum opperated 4x4 selection back to the manual floor lever system (HJ 73) - to do this are you able to change a transfere case without removing the gearbox.

Looking forwards to your input to this question:

Many thanks

Wayne
Top
Posts: 552
Joined: Mon May 26, 2003 2:47 pm
Location: across the pond

Post by beanz2 »

Yes you can. You may have to drop the gearbox crossmember to allow the transfer case halves to separate. The tubular crossmember behind it sits too close.

You are "Wayne BJ73", aren't you?

Dave
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 3 guests