Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

front driveshaft on 40 with v8

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 210
Joined: Mon Jul 18, 2005 7:24 pm
Location: victoria

front driveshaft on 40 with v8

Post by chevJ40 »

just a question about chaniging my front driveshaft currently dirve the 40 with a chev v8 4 speed and split transfer im guessing becxause of the lift or adaption plate but my front driveshaft split joint almost drops out standing static, will putting a 5 speed front shaft in give me much more extra length or should i extend it myself?
cheers
rob
Top
Posts: 438
Joined: Thu Jun 24, 2004 4:58 pm
Location: wollongong

Post by Stackson45 »

If you can get hold of an old rear shaft use the tube from it and make it the right length. Not sure what the length of the 5spd shaft is.
Landcruiser UTE 1996 FZJ75 - SPOA, 35"s,
extended chassis, poor mans extra cab, 4.56 diff gears, Lockright front, chinese air locker rear...
Top
Posts: 88
Joined: Tue May 23, 2006 7:44 pm
Location: brisbane

Post by eye-for-detail »

Stackson45 wrote:If you can get hold of an old rear shaft use the tube from it and make it the right length. Not sure what the length of the 5spd shaft is.
yeah get one made up . They're a dime a dozen.
pretty sure if you went with the 5spd shaft you'de have to change g/box and diff flanges as well
LN106 d/cab, 2in lift, 32s, airlocker,
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 3 guests