Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Wrangler kit and the swaybar

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 10
Joined: Sat Jul 01, 2006 4:34 pm
Location: Rockhampton

Wrangler kit and the swaybar

Post by jockrotten »

Im not sure what to do about the swaybar on my zook.

Ive just finished the yj spring kit and the sway bar is about 60mm from going back. Most would say that this isnt a problem but Im about to put in a 1.6 efi that I want to get plated and Im assuming the engineer will want the swaybar on. Engineers have been pretty picky on other cars I have done; wanting the whole car to come up to roadworthy for a mod plate.

Does anybody produce a long travel swaybar or shoud I just extend the mounts?
Top
Posts: 789
Joined: Wed Aug 24, 2005 4:13 pm
Location: ACT

Post by CanberraMav »

Just extend the mounts.

Its common on nissans and toyotas to extend them.

You will probably have to make them though.
Mud_runner_GQ says:
I need 1.6 metre long shocks
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

I'm actually surprised that any of that will get accepted in Qld going by all the commets from most people about how hard it is to get anything modified engineered. have you run all these mods through the engineer before you started?
Ransom note = demand + collage
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 4 guests