Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
MQ diffs...again
MQ diffs...again
been reading this thread-> http://www.outerlimits4x4.com/PHP_Modul ... fs&start=0 ...as i'm looking to buildup a DD sierra with 31's and MQ diffs. seems like a fairly straight forward project, but was wondering if anyone (mock?) could post some pics as they're all gone obviously
mq's are probably overkill. but would allow for bigger tires down the road
also, did redzook or chopzuki ever end up installing the nissan master cylinder into your sierra's? how hard/easy did it end up being? anything get in the way?
has anyone else installed some since this thread was around (april 05)?? would be interested to hear your thoughts too
mq's are probably overkill. but would allow for bigger tires down the road
also, did redzook or chopzuki ever end up installing the nissan master cylinder into your sierra's? how hard/easy did it end up being? anything get in the way?
has anyone else installed some since this thread was around (april 05)?? would be interested to hear your thoughts too
31" tyres on MQ Diff's Why
You may be better to look at Hilux diffs or even just strengthened CV's for your zook diffs.
MQ diffs with 31's would have VERY poor diff clearance.
You may be better to look at Hilux diffs or even just strengthened CV's for your zook diffs.
MQ diffs with 31's would have VERY poor diff clearance.
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
I ran MQ booster with the MQ diffs, funnily enough it worked really well.
Have pics of my old zook build up if anyone wants some just shoot me your email address.
Have pics of my old zook build up if anyone wants some just shoot me your email address.
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
Believe a subaru forester also bolts up. You may have to alter the Pin inside booster.
Subaru
http://www.outerlimits4x4.com/PHP_Modul ... r+cylinder
http://www.outerlimits4x4.com/PHP_Modul ... r+cylinder
nic
Subaru
http://www.outerlimits4x4.com/PHP_Modul ... r+cylinder
http://www.outerlimits4x4.com/PHP_Modul ... r+cylinder
nic
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
cause i want to be able to beat the sh*t outta it without havin to worry about breakagessierrajim wrote:31" tyres on MQ Diff's Why
You may be better to look at Hilux diffs or even just strengthened CV's for your zook diffs.
MQ diffs with 31's would have VERY poor diff clearance.
i've already got a zuk on lux diffs, wanted to try something simple and different
yeah I put a gq master cylinder onto my zook booster too!
it bolts straight on, just need to put a longer push rod to get the right amount of push!
not hard just a 6mm bolt (i think it was 6mm) cut to the right size!
you need to get a 2 bolt gq master cyl, not a 4bolt!
enjoy ashley
it bolts straight on, just need to put a longer push rod to get the right amount of push!
not hard just a 6mm bolt (i think it was 6mm) cut to the right size!
you need to get a 2 bolt gq master cyl, not a 4bolt!
enjoy ashley
build http://www.outerlimits4x4.com/ftopic130159.php&highlight=
IMHO = who cares if your Opinion is Humble! its your opinion isn't it?
so IMO it a waste of a H
IMHO = who cares if your Opinion is Humble! its your opinion isn't it?
so IMO it a waste of a H
Ive got a MQ master in my 1L, but the holes needed to be drilled 5mm inward...
As for the diffs, Your front will need to be extended on the short side or the hangers will need to be outboarded.
Rear you can knotch the housing just enough to be able to run stock leaf position
As for the diffs, Your front will need to be extended on the short side or the hangers will need to be outboarded.
Rear you can knotch the housing just enough to be able to run stock leaf position
[quote="dazza30875"]whats "FAIL" mean[/quote]
[quote="fool_injected"]
Sometimes your funny Canada :D[/quote]
[quote="fool_injected"]
Sometimes your funny Canada :D[/quote]
Who is online
Users browsing this forum: No registered users and 16 guests