Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Quick Question on the 2.8 3L

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 115
Joined: Fri May 05, 2006 8:32 am
Location: North coast NSW

Quick Question on the 2.8 3L

Post by Spud76 »

Just below the oil filter on the engine block of my 3L there is a banjo type oil nut with dual feeds. One side appears to feed oil to the alternator.
What is the other feed from this fitting supposed to feed?
mine is p!ssing oil and I can see nothing hanging around that looks like it should be plugged onto it.
Thanks in advance
Pete
Posts: 3224
Joined: Mon Jan 12, 2004 6:03 pm
Location: Moggill

Post by phippsy »

On mine it feeds the turbo, but it came as part of the kit. Previously, it only had the one.
Posts: 571
Joined: Fri Apr 21, 2006 7:15 pm
Location: ormeau

Post by bastard »

On mine this also feeds the turbo. :lol:
Posts: 104
Joined: Tue Feb 28, 2006 12:02 pm

Post by millers1 »

Its just a spare and was not used for any thing unless like the guys above you have a turbo fitted then that becomes the turbo feed line, thats why they fit turbo's so quick to the 2.8 no need to drill and holes or tap any thing. regards Steve M
Posts: 88
Joined: Tue May 23, 2006 7:44 pm
Location: brisbane

Post by eye-for-detail »

if its never been turbod it should be just a blind fitting that wedges up against the oil filter housing to stop the banjo from turning when tightening up
LN106 d/cab, 2in lift, 32s, airlocker,
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest