Hi all, I'm very dissapointed with the stoping power of my Gen1. Does anybody know any way to improve it drastically? I heard that the disks and brake calipers from a V6 3.0L is a complete bolt on. Is that correct? Also is any other mod to fix that? My brake pump is new etc.
Thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Help with the brakes!
Moderator: -Scott-
Help with the brakes!
Pajero '87 soft top, 2.6L turbo EFI mod, ARB locker, 2" lifted OME, 31's M/T
Yes you can upgrade to the Gen 1 or Gen 2 V6 twin pot calipers and it is a bolt on job. You will need the larger 23.88mm master cylinder as well.
A few of the US guys have done this and they report a big improvement in braking ability.
If your going to do this then you may as well swap over the front diff and CV's as it is a good strength upgrade allround. If you can find a Gen 1 V6 wreck (with a good front end) you should be able to buy all the bits as a package.
And you can run the ARB front locker
A few of the US guys have done this and they report a big improvement in braking ability.
If your going to do this then you may as well swap over the front diff and CV's as it is a good strength upgrade allround. If you can find a Gen 1 V6 wreck (with a good front end) you should be able to buy all the bits as a package.
And you can run the ARB front locker
I just luv my "clacker Jabber"
Who is online
Users browsing this forum: No registered users and 6 guests