Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

EGT gauge wiring HELP

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 32
Joined: Fri Mar 18, 2005 1:56 pm

EGT gauge wiring HELP

Post by deanchristensen0001 »

HI all I have recieved a second hand EGT gauge via ebay, and it came without wiring instructions

It is a HKS gauge with peak hold and warning. It comes with the probe and a second wiring loom for the gauge

The probe has 3 wires two of which go into a plug into the back of the gauge, there is one loose white wire from the probe.

The other loom has a red orange, yellow and black wire. the black is earth, the yellow is loose and the orange and red have been terminated together into a male bullet connector

Can anyone help with the wiring diagram or advice for the temination of the white wire from the probe, the yellow and the red/orange bullet.
HOOYAHH
Top
Posts: 32
Joined: Fri Mar 18, 2005 1:56 pm

Post by deanchristensen0001 »

Google is your friend.

I sorted out the
Red ACC 12v
Orange Constant 12v
Black Earth
Yellow Illumination/Dimmer control

but I still need to know what the Third wire on the probe is for ?
HOOYAHH
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest