where am i going wrong

[matthewK]

been flowing the manual i already did it once but didnt sound right

im trying to do the tappet on my GQ 1988 tb42
with 1 on tdc which is the timing mark on 0deg
some tappet aint where there suposed to be some are going down while others are up , like ya can do 1in 1ex 2in 3ex 4in 5ex
but 4in and 5ex are slightly down and when ya move the crap a tade clock wise the gaps seem to grow


any ideas where im going worng

matt

[of4x4]

Remember that it's a four stroke.

TDC will only allow you to do half of the tappets as some valves are opening / closing when first cylinder at TDC.

A full 360 degree turn of the motor (ie back to TDC) will allow you to do the other half.

I don't have my manual in front of me, so I don't know the order, but you can probably search for it on here.

[JeSTeROCK]

This should help

http://www.outerlimits4x4.com/viewtopic.php?t=82346

[matthewK]

with cylinder 1 on tdc suposed to do do tapets
1in 1ex 2in 3ex 4in 5ex

with cylinder 6 on tdc
2ex 3in 4ex 5in 6in 6ex

[TUFF MAV]

You have to get No 6 cylinder rocking EX just shut IN just opening to have No1 on TDC

Kyle