Hi guys,
Was just wandering if anyone can help me with the location of the knock sensor on a Toyota 3VZE V6?
I think it is located in the valley underneath the intake manifold between the 2 rear welsh plugs.
I have had the car off the road for the past couple of months getting the heads reco'd and sorting out a few other issues such as corrosion and damaged threads & I have finally got it all back together and running. Thanks to Bart (Toyo truck) for all the help.
I got it back from the exhaust place this morning, as i needed them to lengthen the y pipe that came with my extractors to join up with the catalytic converter, as the pipe was too short.
On the drive home the car hesitated a little with about half a pedal of gas and the ECU light came on. Only a short drive not even 2 minutes.
When i got home the first thing i did was reset the computer to clear any codes that were registered as the car had been running without an exhaust in the driveway for a while during flushing the cooling system. I jumped the TE1 and E1 terminals to put it into diagnosis and it gave me the no problems registered code with reds on. I left it in diagnosis mode and set the timing as it says to do in the manual.
With the timing know set i raced the engine a couple of times and then re-checked it. It was out by approx 5 deg. I repeated all the processes above and set the timing again and the same problem occurred.
I checked to see if a code was registered and it was the knock sensor circuit open code.
I have checked my workshop manual as thoroughly as i can and i can’t see anything about where it is located.
So i guess i have 2 questions.
1. Where is the knock sensor located on the engine?
2. Does knock sensor circuit open mean exactly what it says and there is a dodgy wire or a wire off?
Any help would be appreciated as i my car has been down for a while now and am just really keen to get back into wheeling.
Thanks guys
Dave
[/code]
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Toyota 3VZE V6 Knock sensor location/problems
Moderators: toaddog, Elmo, DUDELUX
Toyota 3VZE V6 Knock sensor location/problems
"There is gold in them there hills"
Re: Toyota 3VZE V6 Knock sensor location/problems
Maybee this will helpdawg runner wrote: 1. Where is the knock sensor located on the engine?
http://www.toyota-4runner.org/showthrea ... eadid=5607
Also.... Here is one for sale
http://cgi.ebay.com/ebaymotors/TOYOTA-K ... dZViewItem
Ricky
Try to keep at least one wheel on the ground at all times !!!!!! (unless you want to do a jump....... thats different)
Who is online
Users browsing this forum: No registered users and 2 guests