Started to do a oil change on my hi mount winch and was just wondering what oil to put back in it and how much of it to put in ...
i have never put this on my car yet i brought it second hand and there was not much oil came out of it any info would be a grate help
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Hi mount warn winch oil ???
I use synthetic engine oil. The manufatures spes state 300ml of SAE30 non detergent, but most people I know just run engine oil. I've also added a drain plug in the bottom, an filler hole to the top and a breather. All of which makes it much more user friendly.
93 Nissan Pathfinder / Terrano Turboed VH45, GQ Trans and T-case, coil overs, hydraulic winch and fair bit of other stuff. (Currently a pile of parts in the workshop)
All I've done is drilled and tapped a hole into the bottom and the top and use a 10mm bolt with a rubber washer. Real simple and effective. The breather is the same fitting as the diffs. I used the one I removed from the chassis when I extended the rear breather. All my breathers run to the top of the rollcage.
93 Nissan Pathfinder / Terrano Turboed VH45, GQ Trans and T-case, coil overs, hydraulic winch and fair bit of other stuff. (Currently a pile of parts in the workshop)
Who is online
Users browsing this forum: No registered users and 0 guests