I have just bought a secondhand Warn 8274 high mount winch with no hand control.
I will be fitting in cab controls but was thinking the remote could come in handy for spooling in the last bit of cable.
So the socket on the front of the solinoid pack has 6 holes in it.
There are only 3 wires conected to the back of it though.
Does this mean I need the 3 pin plug or 5 pin?
I have found a remote with the 5 pin plug and want to know if it will work.
Cheers
Paul.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Warn high mount missing hand control, 3 or 5 prong?
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Warn high mount missing hand control, 3 or 5 prong?
R.I.P Brock Fontanini 28-3-06 - 16-2-08
www.teamcarnage.net
www.teamcarnage.net
Exactly what he said dude.midi73 wrote:Just wire a switch in the front as well. Then you wont have to worry about a hand controller. I did this on mine, with an isolater switch in the cab so people couldnt come along and use it when I didnt want them to.
Titan Solenoids and Winch Rope - competition tested and proven!
Who is online
Users browsing this forum: No registered users and 0 guests