Hello all,
I working on swapping a Jeep NP231 transfer case into my '94 Montero SR with V4AW3 transmission.
A little info can be seen here:
http://www.4x4wire.com/forums/showflat. ... 14&fpart=1
The transfer case will bolt up to the V4AW3 provided that you use a tail housing from a Jeep AW4 tranny. The splines between the transfer case and transmission shaft are the same, but the tail shaft of the V4AW3 appears to be longer than the AW4. I think this problem can be solved by using a spacer and a different length input shaft on the t-case.
Now that I'm pretty happy with the fitment, I would like to turn my attention to making the electric speedometer work with the NP231.
I need to find a wiring diagram mainly. I have the engine, chassis, and elecrical manuals but none of them discuss the speedometer system.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Need Electric Speedometer info
Moderator: -Scott-
Who is online
Users browsing this forum: No registered users and 11 guests