Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Wheels

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 143
Joined: Sat Nov 11, 2006 8:11 pm
Location: Sydney

Wheels

Post by tritontray »

G'day

I have standard 16inch triton steel wheels, but they are just a normal factory silver colour. What would I need to do to get them sorted to paint them a nice black! Can I just cut them back with some wet and dry, or will they need to be sand blasted then powder coated????what are my options.

OR

Would it be easier but lots less fun to go shopping and get some 16's that are black as is.....if so whats the brand thats the pick of the bunch.

Thanks

I have decided that I would like to try and find some black sunraysia type wheels straight off the shelf. I have tried searching the net, but keep coming up with classified ads. Any where in Sydney that sells them. I currently run 16's, but will go to 15's for a good price......All help greatly appreciated
Last edited by tritontray on Mon Jan 08, 2007 8:34 pm, edited 1 time in total.
99 Nissan Terrano II TDi, 2" lift, 30's, UHF, Hellas, Bull Bar
Top
User avatar
DamTriton
God of Athiests
Posts: 8337
Joined: Thu Aug 07, 2003 2:14 am
Location: Brownsville

Re: Wheels

Post by DamTriton »

tritontray wrote:G'day

I have standard 16inch triton steel wheels, but they are just a normal factory silver colour. What would I need to do to get them sorted to paint them a nice black! Can I just cut them back with some wet and dry, or will they need to be sand blasted then powder coated????what are my options.

OR

Would it be easier but lots less fun to go shopping and get some 16's that are black as is.....if so whats the brand thats the pick of the bunch.

Thanks
You could get them powder coated for ~$25 each. Better finish than painting. IIRC they do all the prep for you as a part of the process.
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
Top
Posts: 143
Joined: Sat Nov 11, 2006 8:11 pm
Location: Sydney

Post by tritontray »

Great. Thanks for the reply...will look into it
99 Nissan Terrano II TDi, 2" lift, 30's, UHF, Hellas, Bull Bar
Top
Posts: 3132
Joined: Wed Sep 28, 2005 3:22 pm
Location: Newy

Post by HotFourOk »

I rubbed mine back with wet and dry, cleaned with wax and grease remover, then painted with VHT Acrylic Enamel using a few coats.
Have been that way for months now and are still as new... have been in sand, mud, rocks etc.

The prep time determines how good the finish is, and how long it lasts.

Matte Black FTW :D :armsup:
Top
Posts: 143
Joined: Sat Nov 11, 2006 8:11 pm
Location: Sydney

Post by tritontray »

original post updated.

thanks
99 Nissan Terrano II TDi, 2" lift, 30's, UHF, Hellas, Bull Bar
Top
Posts: 3132
Joined: Wed Sep 28, 2005 3:22 pm
Location: Newy

Post by HotFourOk »

Any decent tyre/wheel place should get them in for you.

Try Tempe tyres/ Big O tyres, etc .. they are all into rice, but have craploads of wheels to choose from... If not, they will have good buying power and will probably be cheap anyways.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest