Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
replacing uni joints
Moderators: toaddog, TWISTY, V8Patrol, Moderators
replacing uni joints
Ok I have stuffed the rear uni joints and i need to replaec them. Whats involved? Is it easy? or is it just easier to pay someone?
Before All toys there was the Landcruiser
Do you have a good mechanical aptitude?????
They are not hard to do if you have a little nouse. Remvove the tail shaft. Remove the circlips from the uni joint caps, on the inside of the yoke.
Support the shaft on an open vice. Have the jaws open about 3/4 of the diameter of the shaft. Support the shaft on the welded section NOT the tubular section of the shaft, it will dent!!!
Hit the loose yoke downwards to push the lower cap out of the shaft. Repeat on other side.
If you have any doubts and want to save a little then remove the shaft yourself and take it to a w/shop to fit uni's
Cheers, Dan
They are not hard to do if you have a little nouse. Remvove the tail shaft. Remove the circlips from the uni joint caps, on the inside of the yoke.
Support the shaft on an open vice. Have the jaws open about 3/4 of the diameter of the shaft. Support the shaft on the welded section NOT the tubular section of the shaft, it will dent!!!
Hit the loose yoke downwards to push the lower cap out of the shaft. Repeat on other side.
If you have any doubts and want to save a little then remove the shaft yourself and take it to a w/shop to fit uni's
Cheers, Dan
[quote="Uhhohh"]As far as an indecent proposal goes, I'd accept nothing less than $100,000 to tolerate buggery. Any less and it's just not worth the psychological trauma. [/quote]
Who is online
Users browsing this forum: No registered users and 4 guests