Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

LT230R speedo drive.

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 2158
Joined: Sat Jan 20, 2007 8:16 am
Location: New Zealand

LT230R speedo drive.

Post by KiwiBacon »

I've recently swapped the LT230T in my 85 rangie to a 1:1 ratio LT230R (from an 85 auto rangie).

My speedo now reads 10% higher than it used to. Since the propshaft speed is unchanged the difference has to be speedo drive ratio.

Is it possible to simply swap across the tail housings on the boxes? I've just pulled the back housing off the old box and noticed the speedo drive is integrated into the driveshaft. Will these plug and play or did they change the centre diff splines?
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

Why not just swap the speedo drive gear in the transfer ?
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 8 guests