Outer Limits 4x4 Board

My misses has an 04 Jeep Grand Cherokee Ltd with the 4.7L V8 and around town its about 17-22 L/100kms. Better on highway, but when fully loaded and towing a double horse float (with two horses), still sits on 22 litres per 100!!!

Hi there, have extended the wheelbase on my SOA 40 series, and need to have the wrap bar modified to suit. Anyone know of a decent company in Eastern Suburbs of melbourne that can do it. I had it made up a few years ago, but took it off not long after, as it was made with no shackle at the front, it ...

Hi Mate, Ive got discs on the rear of my FJ40. Gave diff to a machine shop, they milled a bit, added mid 80's hilux discs and rotors. Best $800 I ever spent on the old girl.

I had a complete custom lengthened rear made for my 40 for $400 from www.drivelineservices.com.au (here in Melb though). They do a full reco for about $200 of your current shaft (that's 2 x uni's and balancing) I have fitted a 60 double cardin up front on mine as the angle is completely shite on my ...

Sorry, www.metaltechcage.com

How about these? http://cars.carcity.com.au/photo.php?stype=CARU&ucnid=3430177&pos=3&sessionid=8AD87547F44E44BBA5206B2AC4128574&includevehicledetail=true&referer=Detail Page&criteriadata=YToyOntzOjI6Iml2IjtzOjg6IvaaWx%2B2vvxwIjtzOjQ6ImRhdGEiO3M6MTQ4OiKsdP7KMEl3%2FOB4zMtUnowSuKmnJ ...

Did you bleed only at the secondary filter, or did you also bleed the bleeder at the pump? I had this problem just yesterday after stuffing around with my water trap under the chassis, couldnt get the thing to start or even turn over, bled the secondary filter, then bled the injection pump (as per ...

Depends how saggy your front springs are, I've got a 40 with SOA, front springs were that saggy they started to invert, have put in a set of 2nd hand front springs and the front has lifted approx 1". Now have to get 60 series double cardan front drive shaft and get it lengthened as the front uni ...

Try Ricky at Tyrepower in Essendon on 03 9379 2616. I just got my 38" Swamper TSL's from him so he should be able to get the LTB's. Tell him Belly sent you

Regards
Chris

Hi there, I have a '78 FJ40 2F (petrol 4.2litre). I have just had Performance Exhaust in Ringwood fit a completely new system comprising new extractors, pipe and single muffler. Old one was completely stuffed. I am fitting a reco'd 2F which has had some major headwork, Shaved, ported polished etc ...

I bought one last year for my 40 series with SOA from BBM Motorsports. I couldn't get anyone from ORI to answer the phone or emails. Supposedly the guy was sick or something. I rang BBM and they organised a chaeper version instead. Didn't realise that with 60 series knuckles (Disc brake conversion ...

39'S on standard??? Love to see it. I've just bought 38's, I've got Spring Over, have already cut heaps out of rear guards, and about to remove and absolute sh*tload more this weekend so expensive tyres don't scrub. I've had to cut off the front bumper ends as well, and will remove the outer lip on ...

Unless you can weld, a cage is gonna set you back a hell of a lot. You can probably by just the roll bar off ebay, or here, if you want a full cage like I imported from Metaltech in USA, including install, allow about 2k..
Good Luck with the project

I ORDERED A SET OF 15X10'S, AND HAD THEM SENT OFF, CENTRES CUT OUT, REVERSED, NOW HAVE 2 INCH BACKSPACING. I GOT MINE THROUGH A MATE. CONTACT RICKY AT TYREPOWER IN ESSENDON VIC 03 9379 2616.

Yes, PGS 4WD hit the nail on the head. Cheap to run etc. I have a 97 40th Ann with LPG (nearly 10 year old system). Bought the truck late last year. Just had major service done (valves adjusted etc). Told exhaust valves are stuffed beyond shimming, now I need to reco head. Been told $4000 to do ...

Mate, go springover, forget converting diffs if you don't have money, I've got SOA and I had 10" rims with custom 2" backspacing done, I'm now 1 inch wider than a 100 series, no problems with tipping over, unless you're an idiot. If you've got no budget limit, buy 80 series diffs, or GQ for front ...

What are they supplying for the lift, is it just springs and shocks, or do you get castor correction, extended brake lines, adj panhard rod, etc etc. What Shocks? Adjustable or not? I did a 3 inch lift with King Springs and OME Shocks for $550 for my 80 series. Installed myslef with help from a mate ...