Outer Limits 4x4 Board

usually its just a few bolts that that you have to pull off and voila, if you have a rattle gun it does make it alot easier to get the bolts off, and as you said before you can pick up some silicon oil from toyota to refill the viscoud fan. Its also a good idea to buy 2 of them just incase

The reason why I want to swap it is because its starting to ping under load. Some of the guys here have said they have used an applauase dizzy when they dropped an applause motor apparently it helped reduce the pinging

hey guys, ive recently dropped an applause motor in, at the moment im using the old feroza dizzy,

the question is the dizzy on the applause motor doesnt have the vacuum lines like the old dizzy, can I still use the applause dizzy?

i got the thule ones as well on my one but only from the front, on the canopy i did a diy job, a welder and some special tools i made a DIY rack :p, i'll post pics soon to show you guys

when you book the car in, they normally ask the VIN or chasis number for that vehicle, so they know which part to order

Hey guys whos received a letter from Daihatsu (well Toyota Australia) ?
It goes :
"we are contacting you to advise that a fuel evaporative emission check valve may develop a crack in longer term usage due to insufficient durability"

that is a good question, but how do i find out whats stuffed? is the only way to just pull it apart and take a peek?

hey guys it looks likes its leaking from the front diff from the drive shaft? does any body here know if this can be a DIY backyard job? or if there are special tools involved? http://i823.photobucket.com/albums/zz153/misterhoang/18112009147.jpg http://i823.photobucket.com/albums/zz153/misterhoang/1...

hey guys
i got my suspension lift from ultimate suspension http://www.ultimatesuspension.com.au its a bit pricey and the only downside to their lift kit is that the leaves is very very stiff. On a bumpy road, the feroza bounces all over the place

the server is down?
any chance anyone can upload it to a new server?

i was aware of the variations of radiators, when i asked for a quote the blokes at daicare asked for the chasis number of the vehicle so i just assumed they matched the chasis number to the right sized radiator

heres the number : 9522 7111
all the best

i was quoted from daircare in the shire for 480 brand new original

hey guys i think i have an issue, the story goes like this: I was driving up a sand dune and then launched off it, it may have been 2-3 metre drop. Upon landing I noticed my steering was not straight any more and upon cheeking for damage both front wheels were wobbling. I limped the car home, so I t...

sorry about the generalised question
its a feroza narrow track
as for gearbox and transfer case i dont know, i was hoping someone here could point me in a direction....

Hey guys I have in possesion a stock standard jdm 4age engine.
I just want to know from those that has done this conversion, what troubles were there? and what gearbox and engine mounts did you use?

I was reading the manual that the F300 came with slotted rotors?
Can anyone confirm this? and if this is the case can I get a pair of slotted rotors and bolt them straight on without any modifications ?

as with the timing belt replacement, i bought a timing belt kit, which also had a seal of some sort?
any ideas of what seal it is (im assuming its the crankshaft or camshaft seal?) ? and how do i replace the seal?

for guys that have replaced the waterpump, was it a square hub or a circle hub?

Don't bother just a wast of money cost me $550 for rest +50mm and a extra leaf added with in 6 months they saged back to standard hight :bad-words: where did you get them resetted ? Ive heard people in SA say that if done properly they are just as good as new springs, but this is in SA apparently t...

hey guys
what are your thoughts on resetting rear leaf springs for extra lift? what are the pros and cons?

i for one is interested

I just did my rear main seal, I put it off fixing it for about 3000kms, and towards the end I was losing a litre of oil for 300kms i drove.

I drive the F300 narrow track i want to find out which water pump it has, whether its the 50mm hub or the 60mm hub ?

I just recently replaced the rear main seal, but the leak is still there =[, you guys think it could be something else that looks like a rear main seal? or do you think chances are I screwed up while i was replacing the new rear main seal ?

sorry about the super delay im finally done with all my uni exams :S well i had a reply and the only place that stocks the weathershields is the ARB in Townsville, and guess what they also have none in stock until May. Unless there is a 'big' order they wont ship any over. Also the cost is $75 I rep...

took another look at the leak today

and its worse case scenario, the main rear seals are gone =[

if it is leaking from the distributor drive, whats the prognosis on that;?
and for the leak from the main rear, what do you mean by that ?

Hey Guys,
I noticed an oil leak from my oil sump, I just wanted to know if its just a gasket to replace there? or do i just apply a sealant around it?
thanks in advance guys

thats actually not a bad idea, i will organise it if there is enough interest