Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Search found 11 matches
- Tue Jul 15, 2008 9:51 pm
- Forum: Nissan
- Topic: GU 12v Power for the fridge ??
- Replies: 3
- Views: 320
they do work but find you need to up the cable size. i put 2 merrit plugs and a cig' plug in the back of mine. just pulled off the rear panel and floor trims and ran 3 runs of dual core 20 amp cable (i always go more amp the required for safety) wired up to second battery with blade fuse on each run ...
- Tue Jul 15, 2008 9:05 pm
- Forum: General Tech
- Topic: 4WD specific insurance
- Replies: 18
- Views: 828
- Thu Jul 03, 2008 8:04 pm
- Forum: Nissan
- Topic: Door Flares
- Replies: 8
- Views: 468
- Wed Jul 02, 2008 8:41 pm
- Forum: Nissan
- Topic: GU rim offset
- Replies: 9
- Views: 539
- Sat Jun 28, 2008 8:56 pm
- Forum: General Tech
- Topic: rebuilding high mount winch
- Replies: 14
- Views: 752
the sky's the limit as far as mod's go on a high mount. just depends on how deep your pockets are. a 6hp motor will set you back around $550 and a worth while upgrade. a good place/bloke to ask advice and get parts is s j leslise's (not sure of spelling) in heidelberg west. makes some speacial bits ...
- Thu Jun 26, 2008 8:42 pm
- Forum: Nissan
- Topic: ENGINE MOUNT 1989 GQ 4.2 PETROL
- Replies: 7
- Views: 460
i've done a couple in my shorty due to owner abuse!! first one i changed with a second hand unit (it was saturday and wanted to drive sunday) bad idea lasted a month. second was a genuine nissan thruogh a mate at a dealership, lasted six months. replaced again with genuine and chained the motor to ...
- Thu Jun 26, 2008 7:41 pm
- Forum: Nissan
- Topic: What major spares would you take ? Simpson trip
- Replies: 22
- Views: 1510
- Wed Jun 25, 2008 7:09 pm
- Forum: Cruiser / Prado
- Topic: ifs steel wheels
- Replies: 2
- Views: 254
ifs steel wheels
asking on behalf of a mate
will 15x7 steel wheels of a ifs hilux fit on a 1984 live axle hilux ?
will 15x7 steel wheels of a ifs hilux fit on a 1984 live axle hilux ?
- Sun Jun 22, 2008 6:03 pm
- Forum: Nissan
- Topic: drum brake diff into disc brake diff housing
- Replies: 2
- Views: 279
- Tue Jun 17, 2008 8:18 pm
- Forum: General Tech
- Topic: n00b: Winch repairs
- Replies: 3
- Views: 341
have had same issue a while back, a new soliniode will set you back around $45 or you could replace your control box with a spartin soliniode under the bonnet with a remote incab switch. i'm putting one of these in soon as they are more reliable and less prone to issues http://cgi.ebay.com.au/TITAN ...
- Sat Jun 14, 2008 11:42 pm
- Forum: Nissan
- Topic: drum brake diff into disc brake diff housing
- Replies: 2
- Views: 279
drum brake diff into disc brake diff housing
have done a search with out much luck so here's my thing
currently have a swb gq with drum brake rear diff with arb air locker fitted.
want to change to and fit up a disc brake housing .
wondering if my diff center/carrier from drum housing will fit into the disc brake housing
currently have a swb gq with drum brake rear diff with arb air locker fitted.
want to change to and fit up a disc brake housing .
wondering if my diff center/carrier from drum housing will fit into the disc brake housing