Outer Limits 4x4 Board

Yep will be all sorted In time

Thanks Brett

Yeah by then I will have a double hoop roll bar/ headboard and 2 stays heading back down the tray,,,,

Thanks for the quick response

hey shaun here....

this event sounds great,, im about 99% cirtain ill nom

just one question, as im running a 80 series ute conversion,,, will a 4 point internal cage be ok?

not much room for back stays in there

yep that was the problam guys ... thanks alot... it is a $59 replacement part from the nissan....

we found it was only failing in 3rd, 4th and 5th , so we unpluged the swich and it started working fine again and the reason it was gutless in those 3 gears was that it was not working at all when the ...

if it was the neutral switch as u say would that explait why it feels gutless when its doing it??
what does the swich actually do and where is it located on the box so i can unplug it?

i forgot this is the 3 ltr turbo model .. non intercooled

no black smoke no and we have have a problam b4 when we changed the fuel filter and air got stuck in the system but that bread out real easy and the moter ran fine.......
is there a air bleed on the pump its self at all???
and no , no ...

ok im hopeing that someone els has had this problam because it has stumped us and im running out of ideas

what the moter is doing is under any sort of acceleration (foot flat or easeing the power on) even overtakeing on the highway.. the moter lurches the power on and off as if the moter is missing ...

Cranky. You've. Convinsed me to put these on mine. Ive Neva noticed them on yours before now. Looks great

im getting 12.84 volts

ok when u turn the key to "on" the truck always made this buzzing noise ifter the glow plug light went out, untill you start it...
whats happening is just that , but when u start the truck all the lights stay on and so does the buzzer... it doesnt stop

please help.. i cant figure it out
i hope that ...

ok what the problam is , is that the moter wont give any spark ..... now there's power at both wires that go in and out of the coil but no spark. Is there something els i can check before going and buying a $190 coil and it not be the problam.. on these moters what tell the coil when to spark ...

ok ive seen a couple of trucks that have a bolt on exo, which bolts onto the brush bars and steps ect.. so it can be removed for on road driving

does anyone have pics of this as im thinking about doing this to my 80 series ute

also, pics of 80 seies ex0cages would be great too

thanks alot

hey cranky?

any chance you could send some pics from inside the cab?
like im after pics of what you have done in the corners and room behind the seats ect


thanks alot

shaun

cranky thats exactly what i want mine to turn out like...looks ausome
Do you mind if i use those pics to hand to dot for my application ??
and with the chop, have you gone right back to the third set of body mounts?

cheers guys
that was the answer i wanted

lol ok

ice, im keen on that body can you give me a call on 0423294541 when you can

cheers shaun

ive heard that they dont have numbers stamped into the body...
is this true?????........ as im looking at putting another body on my chassis
thanks in advance

shaun

cheers...


was there any problam's you ran into with transport?
like body mountings and such

hey crankycruiser?......... what did you send them in the way of pics to show what you intended to do??[/quote]

thanks for all the reply's

does anyone know the procedure to get the car mod afterwards?

cheers shaun

i know ...
im still in the deciding stage

got any pics of it ?
and also what condition is it in

thanks for your reply
shaun

and i have tryed searching,

im interested in doing this chop to another body, then swapping it for the wagon body

is there any legal probs with body swaps? as this is prety much all i can do as i rolled it preaty bad on the weekend

so pic's and ideas are wanted

thanks in advance
shaun

yeah i relise that they dont come standard on the 80
and its the same as whats on a 02 twin cab hilux

i'm having trouble tracking down a rebuild kit for a double cardan join off an 80's front shaft
I've been told you can get then cheap but searching the net revels nothing
thanks
shaun

cheers fester

ive found 2 inch raised bags on superior engineering's website but yeah, no 4's

another question, what happens to the bags when the coils are getting completly extended out (under flex) ?
as i still want to use the cruiser for serious stuff


thanks again

i have been searching on the internet for airbags to suit 4 inch lifted 80 series coils and i'm having no luck.
do they even make them??
if so, where??
thanks in advance
shaun

4.5 petrol moter
just started today
when the moter is under any sort of load its making this pinging sort of noise
but it sounds more aggressive than pinging
like sloppy pistons, or the throwout bearing
any 1 had this
thanks in advance shaun

x2?

ok cool
i noticed on the brake pads they were completely smeared with either grease or oil from the shaft
i degreased everything and put it all back together and it is all fine