Outer Limits 4x4 Board

very cool. ud want strong gears though or something stopping u from accidentaly putting it in reverse haha

thanks want33's i was waiting for it to get back on topic. firstly i cant read my tyre placard so i dont know what the biggest size is on it and secondly wat is the biggest legal size for a 4runner? i think its 31's. are there any big 31's that say 31 but r more like a 33 I am no Hilux/4runner ...

does slope inwards slightly i spose but my guess is the cop was havin a bad day and decided to take it out on u

thanks want33's i was waiting for it to get back on topic. firstly i cant read my tyre placard so i dont know what the biggest size is on it and secondly wat is the biggest legal size for a 4runner? i think its 31's. are there any big 31's that say 31 but r more like a 33

oh realy. so 33's are legal on a GQ. dang. oh well. i only use mine for beach and easy to medium tracks anyway.

i think its 205 on the tyre placard. realy hard to read but. i hav been driving my car around for more than a year on the sunny coast with 33's so im probably not gunna worry about it until i get told to change them. so far i havnt recieved a defect notice so i think im in the clear.

haha yeh. more like a Farkin awsum front bar. cant waite to c it after the powdercote. very tops work. as for the fines. theres nothin much either of us could have done. im not gunna loose sleep over it hahaha

ah k. looks like its 31's for me then. that sucks alot

oh my bad. its a 91 4runner. my car may or may not have been defected. im not sure yet as i wasnt the one driving the car so im not sure if i should waite to c if i get a defect notice in the mail and send the form in then or send it in now and run the risk of me not getting sent the defect notice ...

my car has 33" tyres, 2" suspension lift, 2" body lift, and a tube bar. should i fill out the QLD DOT vehicle modification application form and put all this in it and see if they say ok. or will they just say NO because of the tyres and tube bar? cheers

hey iv got body lift, suspension lift, 33's, and a tube bar on my fourby. im just wondering is it easier to find a friendly engineer to have a look at my truck and get an engineers cert for it or to go to the DOT and fill out the modifications form and have them look at it to get it certified. cheers

searched and found this. just diggin it back up to c if there are any other tube bar makers on the sunshine coast so i can get a good array of quotes. cheers

cheers for the proper answers ruff and rock star. was just a thought. wasnt to serious. will probably get a lockrite till i can afford an airlocker.

ah mate told me the ratio. its a drag racing ratio. yeh i just thought id ask cause i had no idea. no big deal. im gunna get an airlocker eventualy for the back anyway

its rear. and its the whole diff with housing all the way out to were it bolts on to the hub

fair enough. was a simple question. anyone else with some real answers

my mates got a 93 VP comodore rear diff that has like a detroit locker or a lock rite sortov thing in it so it's all the time locked my question is can i put this in my 91 4runner with not alot of trouble. cheers.

hey mate. go to caloundra radiators and cv's. i have a 91 4runner and its were i got mine a few months back. its massive and cools the engine so well. can give it a flogging in the mud in the middle of summer and the temp doesnt change. it cost me $526 fitted with a system flush and some new fluid ...

mine did this. i tryed everything to no prevale so wat i did was take the center console bit out. its like 4 screws inside the bottom storage bit. pull this off and then u can pull off the palstic around ur gear lever and also the part with the rear window switch on it. under this part there is two ...

im with lewie

well for starters the second one is SCA (super cr@p auto) so i wouldnt go anywere near it. i bought a shovel from them and they managed to f@ck that up (it bend in half on the first go in sand) which is beyond me haha. and the second one has no brand so i wouldnt go there either. my aadvise is to ...

cheers for goin to the trouble of taking a picture and everything mate. ill have a look at my mates cruiser wen he gets back from the mines on the weekend. cheers

problem solved. mate took his car to a family friend who is a mechanic and it had the wrong size leads on it so water was gettin in real easy.

yeh cheers mr grim. will try this out next time i c him

yeh considered this but as i said it even does it in water that bairly splashes the car

hey iv got a query i told my mate i ask the outers oracle about. he has just bought an 80 series cruiser wagon. it passed its roadworthy no worries. everytime he drives it into water be it bonnet level or just enough to splash the car a little it starts to spludder and cough and sometimes it evens ...

wow. no viagra jokes. im shocked haha

hey mate i think u live just around the corner from me. u live in the beach courts at bokarina right?

basically wat the title sais. its a 91 model and its been rebuilt so it doesnt have that head gaskit problem they were recalled for.

yamaha123 wrote:200 in qld

my bad