Outer Limits 4x4 Board

Hay mate I have had one on mine for years look on wizard performance face book page I have photos of mine on there flexing up cheers Rick

Hi its not a 5th gear problem! when 5th gear goes you just lose 5th gear because its turning on the out put shaft, you must have a selector problem !!cheers

Hello, Just a quick question what turbo would you run to get 250 to 350hp out of your TD42 and what would you have to do to your internals????if anything cheers

Hello mate the reason why the early 3lts blow up is not because the over fuel! it is because the over boost and the solenoid that controls the variable vane turbro is not strong enough to pull it back off boost when they over boost witch causes the pistons to melt, normaly number 4 this is my ...

Hay mate check the front lower control arm bushes if they are split right open, that can cause the front diff housing to move around while driving and cause problems cheers Rick.

why clean out the oil in the intake ????? as soon as you go for a big drive it will be right back in the pipes !! and what is the crank case mode ?? cheers My mate got a ROO system on hes 2010 Y61 ute and it made a big differance. cheers

Hello you can not do a fuel pump relearn on a ZD30 and you can do it on all YD25 D40's and R51's. all you are doing is resetting it !! there is nothing to delete all you are doing is backing off the fuel pressure cheers

Hay mate i know its not right but when i done on mine i put 2 washers on one of the bolts and everything worked sweet cheers

Hay mate when ever you replace a fuel filter on a YD25 you are suppose to carry out a fuel pump relearn its so the ECU knows that it has a new filter and it backs off the fuel pressure and they run smoother cheers Rick

Hay mate I run Fabtech shocks all round on my GQ and love them:) I had fox on the front for years and did not miss a beat, I have now got fox coil overs for the rear to fit and run my fabtechs as smoothies next to them. I would never go back to a normal shock go the fox cheers

Hello at work we have had to send them away !!!! to Gibbs trucks they pull them apart clean them up and rebalance them cheers

Hello I had a look at work today and a ZD30 and a TD42 both had a towing capacity of 3.5t maybe my mate truck had a tow bar off a ute ?????????

they should work genuine rubbers look similar ??

Hello, If you know someone with the same drive line in there truck swap tailshafts over because that is what your problem is to much grease !!!!!!!! in your drive shaft cheers Rick.

Hi guys, maybe looking a buying a nissan patrol but not sure which way to go, i can get a late 2003 GU 3ltr turbo diesel automatic for 20k and a 2001 model 5 speed with a lot of extras for same price, been told fuel pumps can be a problem and expensive, if so is the 03 model pump better than the 01 ...

Hi guys, maybe looking a buying a nissan patrol but not sure which way to go, i can get a late 2003 GU 3ltr turbo diesel automatic for 20k and a 2001 model 5 speed with a lot of extras for same price, been told fuel pumps can be a problem and expensive, if so is the 03 model pump better than the 01 ...

Hay mate set them hot both intake and exhaust at 14thou, put in on top dead adjust half then turn over 360 and adjust the other half. hope this helps, but what is the go with the dail intercator gauge ?????? cheers Rick.

bhundi wrote:cool thanks rick.do you have to get it engineered once you have fitted the lift kit?cheers pete

Mate it's up to you!! if it's mine I would just injoy it

Hay mate just an idea put a clear hose from your lift pump to your injector pump and see if your fuel is air rated because I have seen alot of after market fuel filters suck air and cause alot of problems. cheers Rick.

May be try your intercooling pluming with 2 1/2 tubing instead of 3inch ????? may try ebay for a second hard PWR off another car and make it fit just an idea cheers Rick.

Hi all,

I have recently bought an 02 GU111 4.8 Auto Patrol.

It has a lovells 2" lift.

When Im slowing to a stop (well nearly stoppeed) theres a clunk from the rear.

It seems as though when braking, something moves, then pops backed when stopped.

SOMETIMES, if I brake really gently itll do it ...

hey all im looking at fitting a three inch lift to my 4.2 desiel gq.it has a two inch body lift.can you get away with castor correction bushes or do you need drop boxes and all the other mods you hear and read about? many thanks in advance..im looking at maybe a suspension stuff kit or EFS kit,any ...

Hi HQCRAZY What do you use your truck for? what to you tow? How much power do you need??? I have a GQ wagon with a garrett T3 highflow turbo running 12psi put a 01 injector pump in it PWR front mount and 21/2 tubing sorkel etc and it puts out 160hp at the rear wheels and it does do every thing i ...

Hay mate How much black coal does her blow out the rear ????? I put a PWR front mount on mine and did not have a problem cheers Rick.

Hay mate is the TD42 an early model or a later model engine due to the earlier one were a stronger engine! If you can afford it put the turbo pistons and rods in for peace of mind.Cheers Rick:)

This would my only option. Landcruiser 70 series dual cab.

http://www.caradvice.com.au/157052/toyota-landcruiser-70-series-dual-cab-ute-coming/" onclick="window.open(this.href);return false;

http://i323.photobucket.com/albums/nn444/Vans1979/Cool/IMG_0235_large.jpg


x200 here!

yea you WON ...

Hay mate your truck looks sh1t hot love the flex using 37s it does not mater how your truck drives it all comes down to what shocks you run to how it handles on the road. I know this is off the topic but I got some 14inch fox coilovers to put in the rear of my GQ wagon, using my 14inch fabtechs ...

Hay mate I know this is left feild but have you ever driven the new D40 550 175kws and 7speed auto and before you say no, they do drive alot better then the YD25's and can tow alot more cheers Rick.

Hi Guys,

Just a quick question, has anyone tried to fit the underlip tonneau cover to a 2010 st navarra D40? Popped the tub liner in myself.

Cheers
Blake

Hay mate what do you mean by a under lip tonneau cover? is that one that runs the alloy strip around the inside edge ??? and the cover locks ...

Thinking of either running a z link steering arm or using rose joint on one end of the steering arm instead of a ball joint to over come binding through articulation.
It s on a GQ with 5 inch flexy coils, Atm it has super flex arms but going to a 5 link.
What about heating the pitman arm and ...