Outer Limits 4x4 Board

thank you!

christover1 wrote:

kamote09 wrote:Hello,

Can anyone show a photo of all the hoses and the normal configuration of the carbs for a 1300? thanks...

try here, good carby diagrams in download section

http://www.zook4x4.com/

Hello,

Can anyone show a photo of all the hoses and the normal configuration of the carbs for a 1300? thanks...

Hello, I was wondering if anyone is using an LPG (ats) on their sd33td? I rode an LC80 with an ATS and it really amazed me...i was wondering if it can be done on my rig(sd33td LWB MK)? How much would it cost and would I be able to install it myself without permanent modifications on the engine ...

may i ask why an oil drain is needed for the turbo? is it ok to have none?

or am i just getting the wrong idea?

this is great news for me..thanks for the feedback. Luckily, we have more GQ high roof here in the philippines than the MK's and I seldom see MQ's. I don't think i'll have problems looking for doors when I have my rig body repaired.

Thanks,

kamote

thanks for the inputs...sounds logical...and I'm sure it works just as expected...

are the front tires really inverted?

Screwy,

do you mean GQ' doors would fit the MK's body?

how about baskets? would the GQ's top be the same with the MK's?

TIA

Screwy_ScrewBall wrote:Yes they are interchangeable.
So are GQ doors.
Put this post in the wanted section

oops...i don't think i released the handbreak. I will try the test again to and I'm hoping with the slightest change that my patrol got LSD's on it...better than nothing i guess... Thanks ExterraGuy Note that that test only works with the transmission in neutral (and t-case-mounted parking brake off ...

DR Frankenstine, are you pertaining to LSD for an MK? How would I know the particular model of my MK? I'm from the philippines and own a w160 lwb 5 speed. I tried spining one rear tire while my rig was on a lift and the other tire turned in the oposite direction, so i guess I don't have LSD's. TIA ...

hello,

Was planning to have a custom roof rack with 8-10 legs on my LWB MK...I was wondering...would anyone know the load limit of the gutters? any idea at all?

I've heard that defender 110's have a ton load limit? does an MK's come close to this figure?

TIA

Hello All, Sorry...I know you guys are way too techy to even look into this ..but i really need your help... anyways..i just had my shackles extended today 2x as long as the original for both front and back... my front had some limiting factors...1) shocks -no question here...just purchase 2" longer ...

do you think this can be fixed by doing a top overhaul? valve seal defects? or piston ring problems?

check for fumes out of the oil filer cap, if they are present its a bad sign...

do i see a crack in your first photo? I hope its just the oil seals...

thank you for all your feedback...steps to be taken on my rig in the next couple of days check if my thermostat is still intact probably reco my radiator just in case holy! i just remembered...i haven't had my valve clearance checked since december...would this be a major factor in causing ...

I hope its ok to ask questions here, if not kindly delete my post. I'm from the philippines and when i'm caught in heavy traffic jam (which is more than normal) and during noon time, my temp would go a notch over 1/2 mark probably 1-2 pointer thick from the midline. At what temp level should I be ...

I can't stop laughing!

you guys are one crazy bunch :

I had two blow outs last weekend on separate instances thus I was forced to buy a set of 32's on my rig ASAP...o well there goes my plan of slapping 33 MT's....anyways... can anyone please post a photo of their front and rear extended shackles? or can someone direct me to a link please? I was ...

O.T.

should the oil light up during preheat and starting the engine as well as when turning it off?

Please advise.

TIA

I'm probably asking a stupid question...but what the heck....

What is done on diesel engine tune-ups? I know gas engines are being tuned up...

does it only include the valve adjustments for the diesel engine?

Questions: - What do you use for a 2" body lift? is it true that you can actually use roller blade wheels for this? Rolerblade wheels ... send a pm to high n mighty or email him on .... high_n_mighty2703@hotmail.com thanks...i've seen some here in PH do it on their LC's - How do I gain a 2 inch ...

oh noh...i tried to reply but i guess i got bumped...

Hello,

Thank you so much for the feedback. I'm planning of getting 33's really soon and hopefully I'd be able to fit them with just minor modifications.

Screwy, saw your mods...one nasty rig you got there! really great man.

Kamote

Hello All, I've been reading the posts and this is a great site indeed. Verify informative and I've learned a lot. I do have question to the guru's here. I'm from the PH and own a LWB SD33TD MK series 5 speed box stock. I've beeen doing some light trailing and i've always encountered centering my ...