Outer Limits 4x4 Board

No offence taken. I know you can get the same from a single but everyone does that. I wanted to be different and i know i am not the first to twin turbo a patrol but it is rare.

Had similar problem with mine found it was a vaccuum leak at the clutch booster relaced the front seal and was all good.
Just re read your post my brake pedal was hard not sinking to the floor.

I went twin turbo with my TD42 have not intercooled it yet only wound the pump up a bit. intercooler will be fitted very soon and then off to the dyno. I have mates all with intercooled single turbo's and i reckon mine would beat all of them on the Dyno (at least for torque). It boosts at 1300 revs ...

Mate of mine just sold his engine and gas sytem for$1500 in QLD

how do i tell what ratio it is if the diff is in pieces? is it stamped in it somewhere cheers

thanks fellas just had a look on ebay $20 each plus $6 postage

I have seen these before just want to know where to get them from, and to find out if they are any good

Does anyone know where i can buy these catches aftermarket for a reasonable price

I have got the poos with my 12HT. Its like the turbo isnt working. I took the turbo off pulled it apart there is nothing wrong with it.I put the turbo back together put it back on the car take it for a drive and its gutless i push the clutch in and give it a little rev turbo whistles and spools and ...

Well my car wont turn off and i was told it was the edic motor switch on the side of the injector pump because it turns off when i push the switch thing to the front of the car and i tried pulling it apart to clean it thinking it was sticky but it still doesnt work. i am able to get ahold of a few ...

thanx heaps buddy

Hey Guys does anyone know if the 2H injector pumps are the same as the 12HT injector pumps. Cheers

The guy that dynoed my car said if i went back to 31's i would have 160 - 170 Horsepower. so tyre size does matter

its alreadt 3" from the dump to the back diff

thanx mate i might try that. im an exhaust fitter so yer i might even try makin 1 but i think it might be easier to buy 1.

i only have photos on my fone but i might be able to get ahold of a camera so i can get some for yas.

What is the hill your going up like. is it big and also what is hanging on the key ring. because i had one a while ago and the key ring kept flicking around and turn the ignition off on me.

its now running about 14 psi

Nah its manual. im pretty stoked with it

Nah it was in 4th gear.

I know its the edic motor causew im having the same problem with mine but i don't know how to check the vacuum i think it might be one of the hoses on the back of the intake tube going from the turbo to the inlet on the engine becvause i intercooled mine and broke a plastic thing that bolts toit ...

Thanks Guys i have just intercooled mine and wound the boost up a little and got it dynoed the other day and it come out with 124.5HP and 715Nm torque but thats with 35" Baja Claws on so im pretty happy. Cheers

Does anyone know how much torque and horsepower a 12HT has standard. and has anyone modified theres to get more out of it.

Hey mate i have a 12HT and the 2H alternator does fit i have put 2 on my car i had a bad run with them. So yer it should fit.

Gday
My wife has got a holden vectra she wants a good deep note out of it not the crackley tinny sound what would be a good set up for this cheers mate

Thanx guys. my capabilities arent to bad. croozer is actually my bosses name on here i havent got aroud to gettin my own yet so im just usin his for now. But im an exhaust fitter by trade so the cutting and welding issue is nothing much and i also have a mate that is an engineer so if worse comes to ...

Hey, I have a 61 Series 12HT Sahara and i have a 2"body lift, 6" spring lift and 2" shackle lift and 35" tyres. It already had the body lift when i brought the truck and it was all fine but the aircon wasnt gassed so i dont know if it wasnt gassed because of the body lift or not but i got under it ...

Hey, I have a 12HT 60 Series and im thinking of putting it on coils. At the moment im thinking of just putting the motor and body on an 80Series chassis as i like the 60 Series body and i love the 12HT. Has this been done, if so how hard is itor is there anything else that you can do to put it on ...

hey guys, i have a HJ61 with the 12HT in it and i have lifted it etc and i have a locker in the front and the rear of it and i keep snapping rear axle studs what can i do to stop this i have tries drilling the holes out and putting 100 series studs in but that was unxuccessful i still snapped the ...

I have a 60 series landcruiser with a locker in the front and i am constantly doin CV's. What are the Motorchamp CV's like does any1 know?. any help would be grateful thankyou as i am only 19.