Outer Limits 4x4 Board

I've put the adjustable 9000s into my LWB vit, but made up new top brackets to lean the shock back at about 30 deg. Works great. Number 3 setting now like number 1 was. Just loose a bit of travel.

Ive used this for about 12 months and has worked great. Dose 4x 29x7x15 tires from 14 to 25 in 50 SECONDS, enough to do 10 to 12 tires. refills $15. After the first 4 you need to let it warm up a bit or it will freeze. Keep the bottle upright and if the gauge on the reg starts going up it means its ...

I was thinking of a small aircon compressor off a 1.3lt or similar, i have driven a new small car and not noticed the aircon kicking in, so the lose in power should be very small compared to the gain.

I dont know much about turbos, but why not fit a aircon unit in a box between the turbo and intake. shorly this will cool down better than air to air intercooler. Should be able to control temp as well.
My 2 cents

Try bleeding out the air lock in the top water hose on the carby, the auto choke plays up if its not bled out. Had this same problem in my sons carby.

Charged_ZooK , Is yours an EFI and can we get some pics.

Thaank You

Is there a bigger alternator that will fit in a Vitara, i think standard is 50amps, ive got 2 vits, ones 93 4d and 89 2d project. The 4d is set up with duel batt and redarc smart start. When running aircon and fridge for a while the smart start starts clicking to charge alternate batt, ive got the ...

cj, hard is probably not the right word, a little harsh might be more like it, i was getting a gut shacking on the hwy with to standard struts, so changed them, fixed the shakes but found bumps more noticable. I had a Liberty wagon for 3 years before the zook so was spoilt.

Heres a photo of a arm mod

nice flex in the back, what shock you running. Im building up a 89 hard top and this info is helping out. Ill post some pics of my modified front control arms soon, dropped the pirches by about 40mm to get longer custom coils in on my 4door, but found the the OME struts to be a bit to hard. What you ...

sorry to hijack Ive got a busted mount in my 89 that im building up. If the biger mounts will fit mine ill swop the good one that i have, but i need 2. Are they thicker in hight, cos i put 2in body lift in and i want to lift my engine and gearbox abit to angle the engine up to get better rear shaft ...

I got mine from i think bunnings for about 12 bucks about a year ago. Its a sheet metal hole enlaging tool, just happend to be the right tapper. Ive used it to flip my ball joints on a vitara. Will open a tapper up to about 19mm. Best done in a drill press slow. By hand it chatters abit, take it ...

Wared ya hear about my swaybar disconnect ? its been working for over 12 months now, should be tooling up soon to sell em. Hows your rig go with 2 adults, 2 teens, roof pod and camper trailer. I did a 2 week 4600km flat out trip to Tazzy and got avg 11lt/100. I want to improve power beteen 3 and 4k ...

try rubber grease, it works for me.

Ive drilled a 1/2" holes in my vit cones and it has softend them a bit, looking at making my own spring loaded ones.

Thanks all Flyinwall i think your on the right track, need to look into it. Yes i ment TBI my 93 MPFI 16v motor has only got 130k on it, havnt done a compression test on ti yet, extractors, 2" exhaust , not sure if this has effect a busted cat (no guts) got rocked. ive made a vernier cam pully and ...

A freind and myself are tring to work out why the 1.6 throtle body injected engine has more low torque than the 1.6 multi point injected engine. Are there cam differances, computer and or injectors or a combination of all of them. Ive got a MPFI and want to get more low torque or is that Power. seem ...

Thanks Ben Dosnt have the longer spring shackles. Does have a single motor in the dash with worm drive to the wiper units. The vents are operated by a knob that moves up and down a ratchet Has a hand throttle in the dash to the left of the instrument panel. Ill check the chassis tomorrow. Thanks ...

munecito
i can do the job for you if your not in a hurry. im down in wollongong and come up to my parents in georges hall every now and then, will be there sat 24th.

Thanks ISUZUROVER Theres no D on the badge, but when i checked the badge i found that it has a G at the end not a 6, havn't checked the chassis yet, didnt know where to look. Its also got 4 head lights, 2 on the gaurds and 2 between the gaurds. Guess that it might be military model but not sure by ...

Ive just picked up a Landrover 88in series 2A , was free to good home. my problem is how to work out what year model it is. The badge has Chassis No 243159836 another badge Pressmetal Corp Body No LRS 13527 and Ser No 8813527. Thats it, i havent owned a Landy befor so any help would be appreaciated ...