Outer Limits 4x4 Board

I did a body lift on my nk and entended the shifters by 2 inches and made bends in them to suit so when sitting in car you would have no idea a body lift was done all rubber boots were saved and bolted back in to same holes and no trimming of centre console was required. dont dodge it up do it ...

mate I had extra tabs welded on my alloy bar for 15 bucks each. that was at formula offroad in sydney but you should be able to find somone to do it look for a truck body builder.

cheers eddy

No it is up the back of oberon. Nice little track

cheers eddy

I have a number for a cheap head guy in qld just had to buy one for my bravo td will have a look forit.

check out my nk paj thread couple of photos there worth every cent.

cheers eddy

yeah 21 inch body lift I wish lol maybe 2 inch [/quote]

just a quick run down on my paj

NK v6 3.5

2inch tough dog lift
21inch body lift
33 bf muddies
snorkel
uhf
front lokka
2.5 inch zorst
custom front and rear bars and sliders on way
custom dents and more to come
photos are before body lift
[/img] http://i13.photobucket.com/albums/a283/eddy76/IMG ...

do the paj there are quite a few around now with sas way cooler i reckon. I can tellyou that a couple have been done with danas and it seems to work really well. As soon as funds allow I will be doing mine.

cheers eddy.

dont have an aeriel but i can tell you ireplaced my electric on three times then found that a cheapy $12.95 hilux ariel fits straight on alsoI am after a rear tail ligh rhs in rear bar if you have one you would be intrested in selling.

cheers eddy.

mine does the same it is starter motor. driven through mu to many times and not dropping back quick enough

dont want to alarm you ian but that is what my nk 3.5 was doing and the problem was a couple of butterflies in the plenum chamber had worked loose and were getting jammed . I had it looked at but was told all was ok but in the end it cost me a new motor when they sucked through and into head ...

Hi, I have a swb softtop '91, and am in the process of getting new wheels & tyres, I have opted for sunrasiers but found the 15's do not fit as the calipers jam up on the inside of the rim, therefore I have to go 16's as they will fit, hope this helps, cheers :)

Did yopu actually try to fit the ...

Rang clutch guy today $570 for standard clutch $760 for heavy duty clutch pretty reasonable i thought and 450 if I want him to fit it but will prob do myself. will go with heavy duty I think.

cheers eddy

Thanks mate I will ring around tomorrow.

cheers eddy

I am need of a new clutch the last one was installed with new motor at acost of $800 and has lsted less than 2 years what is a resonable price to expect to pay for a new clutch kit. Mate just bought one for hilux $250..

any thoughts

cheers eddy

I have the oztrail and have camped many times in heavy rain and wind and no real probs in 2 years. just water proof it properly and buy the centre pole removal kit.

cheers eddy

Good luck with it mate sure uwill build a great truck.

cheers eddy

Left hand side pulls right out of the diff so it needs to come out.

Right hand side bolts to the axle, possibly won't need removing after unbolting as you'll be able to move it out of the way (sort of)

Thanks mate
Thats what i was thinking. I have been reading your build up nice looking truck ...

When i remove front diff in my nk paj do i need to remove cvs or can I just unbolt them. I know in hilux ifs you can just unbolt them but after reading info sent with lokka it says remove cv.

cheers eddy

Did yours come with a steering dampner......? I have made a bracket to fit mine, real simple. I am fitting an Old Man Emu Range Rover one (pin's at each end to make mounting easy). Will hopefully get it on this weekend, my U bolts were the wrong size.

NJ

Apparently not but with the 33,s it feels ...

Ordered a new steering dampner today and was told they do not make a togh dog rtc for a nk paj or rancho either so wondering what others hve done.

cheers eddy

bellcay wrote:I live in Rocky and had a 4x4 wrecker in Brisbane send me up a set off a Triton (second hand) for $45 . They fitted and worked perfectly , and I have had no trouble with them.....Cheers

thats a great price I was quoted 200 today.

cheers eddy

Just wondering which free wheling hubs I need to get to fit a nk 3.5 paj I beleive from tech section any off a triton will fit is this correct?

cheers eddy

I have tough dog and i think they are pretty good ha them in for 2 years and i tow atrailer everyday.

cheers eddy

I understand what you are saying but it is supposed to unlock when you turn i think? it is only a weekend toy not used for anything else.

cheers eddy

j-top paj wrote:

PajeroSRV wrote:Try www.4wdsystems.com.au

Give them a call.

good luck, i have tried dealing with them a few times and their service is hopeless

spoke to them today and yes they do one I think Iwillneed free wheeling hubs but they dont.

opinions please?

cheers eddy

PajeroSRV wrote:Try www.4wdsystems.com.au

Give them a call.

thanks mate i will

cheers eddy

I am looking for a cheaper alternative for a front locker and am trying to import a lockright from the states wondering if anybody has done this or if anybody knows who manufactured the front diff for a nk 3.5 v6 is it done by mitsubishi or is it generic.

cheers eddy

Afew pics of weekend on 33,s now http://i13.photobucket.com/albums/a283/eddy76/4wd%20misc/P6100021.jpg
http://i13.photobucket.com/albums/a283/eddy76/4wd%20misc/P6100019.jpg
http://i13.photobucket.com/albums/a283/eddy76/4wd%20misc/P6090023.jpg
http://i13.photobucket.com/albums/a283/eddy76/4wd ...

just an update ended up getting a set of 33x12.5 x15 bf goodrich off another forum member with good tread at the right price so on they went. Went for a wheel today and had a very small amount of scrubbing so about time I install the 2 inch blocks I have had in the shed for about a year but thanks ...