Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
PTO mk/mq
PTO mk/mq
Hey guys does anyone know where i can get a PTO for a MQ/MK g/box? I dont want a winch just the right angle drive from the g/box. I live on a property and think the old turbo diesel would be good for running an irrigation pump. Plus other PTO driven things
Any info appreciated
Sterlo
Any info appreciated
Sterlo
Uhhm does it look anything like the one below ?
I was told that is was from an MQ diesel, but i know SFA about nissans.
The gear is approx 28mm ID with 28 splines, the mounting holes are 7cm apart
This and a set of shafts to suit are for sale. I was searching info on nissan PTO's when i stumbled on this thread :-)
I was going to list on Fleebay but I'm open to offers (':lol:'). PM me for more details about the shafts etc
Cheers
Daryl
[/img]
I was told that is was from an MQ diesel, but i know SFA about nissans.
The gear is approx 28mm ID with 28 splines, the mounting holes are 7cm apart
This and a set of shafts to suit are for sale. I was searching info on nissan PTO's when i stumbled on this thread :-)
I was going to list on Fleebay but I'm open to offers (':lol:'). PM me for more details about the shafts etc
Cheers
Daryl
[/img]
Talking on www.rmp-o.com the front PTO on a nissan box comes out of the gearbox like the above photo. Most rear come of the transfer like mine. Mine is unique as it also runs a front PTO of the transfer
2010 TB48 GU Patrol
1973 G60 MWB Soft Top Showcar
1972 G60 MWB Soft Top Project 4WD
1978 G60 Ute "HellPatrol"
www.oz4wdclassicparts.com.au
1973 G60 MWB Soft Top Showcar
1972 G60 MWB Soft Top Project 4WD
1978 G60 Ute "HellPatrol"
www.oz4wdclassicparts.com.au
Yea ive got the same PTO on a 4spd, could be put on a 5spd as the transfer is the same - would just need a longer shaft to the winch - have got a 5spd in another MK so i can confirm.Rosey55 wrote:so where did this thread end up, can you get a PTO for a 5 speed mq/mk patrol??
cheers
So does mine...Mine is unique as it also runs a front PTO of the transfer
There are no stupid questions, but there are a LOT of inquisitive idiots
http://www.rmp-o.com/phpbb/viewtopic.ph ... 4248b34edf
All the pictures you need to see...
I have 3 of them for the MQ/MK 4spd & 5spd. They were common on the Safari which is a Japanese Patrol. New Zealand got tons of Safari imports, hence I got all 3 of my PTO's out of NZ. Junkyards in NZ have them or try Trademe.com You just have to know who to ask, how to ask and where to look.
Rear PTO boxes can be found for the MQ/MK also but only on Fire trucks. It could be bolted on a normal MQ/MK though to run a rear PTO winch or hyd. pump or whatever.
Oh ya...plenty of GQ PTO boxes in NZ too....just have to know where to look.
All the pictures you need to see...
I have 3 of them for the MQ/MK 4spd & 5spd. They were common on the Safari which is a Japanese Patrol. New Zealand got tons of Safari imports, hence I got all 3 of my PTO's out of NZ. Junkyards in NZ have them or try Trademe.com You just have to know who to ask, how to ask and where to look.
Rear PTO boxes can be found for the MQ/MK also but only on Fire trucks. It could be bolted on a normal MQ/MK though to run a rear PTO winch or hyd. pump or whatever.
Oh ya...plenty of GQ PTO boxes in NZ too....just have to know where to look.
www.rmp-o.com
Does any one know how the gear connects to the shaft inside the transfer case ?
I have one of these winches and adapters that go on the back of the transfer case, but am stumped on how the gear that comes with the winch connects to the main shaft, yes the spline is right, but the gear on the main shaft takes up the whole spline.
Or do i have the wrong transfer case ? Like i might have mq and need mk ?
any helpful links or pics, would be much appreciated.
thanks
I have one of these winches and adapters that go on the back of the transfer case, but am stumped on how the gear that comes with the winch connects to the main shaft, yes the spline is right, but the gear on the main shaft takes up the whole spline.
Or do i have the wrong transfer case ? Like i might have mq and need mk ?
any helpful links or pics, would be much appreciated.
thanks
The PTO box you pictured and the one Swerve shows is a rear PTO box, not made by Nissan. Also note that the pictures Swerve posted are of the old G60 3spd tranny and transfer not the MQ/MK 4sp/5spd.
I am not really clear on what you are asking...
The rear PTO box pictured in this thread is an Aussie made box. There is a chain drive inside the box that runs the offset PTO shaft. Very similar to the PTO boxes that were put on old Willies Jeeps in the 40's/50's. I am guessing you have a PTO box like Swerve which is for a G60 not an MQ/MK.
I am not really clear on what you are asking...
The rear PTO box pictured in this thread is an Aussie made box. There is a chain drive inside the box that runs the offset PTO shaft. Very similar to the PTO boxes that were put on old Willies Jeeps in the 40's/50's. I am guessing you have a PTO box like Swerve which is for a G60 not an MQ/MK.
www.rmp-o.com
Nice ! Plan to sell one of them ? A friend of mine is looking for one to run a hydro pump for his winch off it.RMP&O wrote:http://www.rmp-o.com/phpbb/viewtopic.ph ... 4248b34edf
All the pictures you need to see...
I have 3 of them for the MQ/MK 4spd & 5spd. They were common on the Safari which is a Japanese Patrol. New Zealand got tons of Safari imports, hence I got all 3 of my PTO's out of NZ. Junkyards in NZ have them or try Trademe.com You just have to know who to ask, how to ask and where to look.
Rear PTO boxes can be found for the MQ/MK also but only on Fire trucks. It could be bolted on a normal MQ/MK though to run a rear PTO winch or hyd. pump or whatever.
Oh ya...plenty of GQ PTO boxes in NZ too....just have to know where to look.
'04 Nissan Terrano 3.0Di ZD30 *pimped*, some Zooks & '87 GQ
No i baught one that came off a mq/mk.RMP&O wrote:The PTO box you pictured and the one Swerve shows is a rear PTO box, not made by Nissan. Also note that the pictures Swerve posted are of the old G60 3spd tranny and transfer not the MQ/MK 4sp/5spd.
blu110 posted pics of a rear pto unit he has for sale, that came of an mq/mk !
I am not really clear on what you are asking...
The rear PTO box pictured in this thread is an Aussie made box. There is a chain drive inside the box that runs the offset PTO shaft. Very similar to the PTO boxes that were put on old Willies Jeeps in the 40's/50's. I am guessing you have a PTO box like Swerve which is for a G60 not an MQ/MK.
thanx for trying thow
When you pull the back of the transfer off (carefull not to drop the rollers!) you need to undo the nut - its really tight, then slide the gear out (remember which side faced out and mark it) the gear needs to have the shoulder machined off of the back of it so that the rear surface is flush with the edge of the teeth, then there is the part which which sitting seperate in your picture ontop the pto - it slides on the shaft behind the gear where the shoulder was and the nut goes back on, the outside of this part fits inside large spline on your pto box when the pto is engaged. - if you can picture all that!Tim D wrote:Does any one know how the gear connects to the shaft inside the transfer case ?
I have one of these winches and adapters that go on the back of the transfer case, but am stumped on how the gear that comes with the winch connects to the main shaft, yes the spline is right, but the gear on the main shaft takes up the whole spline.
Or do i have the wrong transfer case ? Like i might have mq and need mk ?
any helpful links or pics, would be much appreciated.
thanks
Another thing make sure the roller bearing inside the pto box is in good nick - it supports the g/box output shaft and if its stuffed you will bugger transfer cases.
There are no stupid questions, but there are a LOT of inquisitive idiots
Who is online
Users browsing this forum: No registered users and 2 guests