Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
More turbo help........
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Temporary Australian
More turbo help........
a little advice needed on a turbo...... i'm not after high boost, or high rpm's. I'm looking at about 6-8psi, quick spool up, and work best between about 2,000 and 4,000 rpm on a 5.0 litre V8. A guy i was talking to, who is a mechanic seemed to think that something along the lines of a T3/T4 combo would work, but might run out of puff at high revs.... and if i run low boost, could do it fairly easily without a lot of modifications to my engine management. It already has a HSV chip in it.
I got the nod of approval from the Minister for War & Finance i just have to find me a turbo at the right price, and get it installed
I got the nod of approval from the Minister for War & Finance i just have to find me a turbo at the right price, and get it installed
There is no "I" in Team, but there are 5 in Individual Brilliance
Temporary Australian
i agree a disco potato would be more what you want it has good power and its not as laggy as a t3/t4 . but if you you go for the t28 i know a place that sells them brand spanking new for $500 each .KiwiBacon wrote:One T28 each side. Disco potato perhaps.
The minister for war and finance is going to hate that reply.
(thats if your in sydney)
GQ CHOPPED TO EXTRA CAB UTE ,
38 SWAMPERS,
,6INCH LIFT, BUT ITS GOT TO GO TO FUND A NEW WORK CAR
38 SWAMPERS,
,6INCH LIFT, BUT ITS GOT TO GO TO FUND A NEW WORK CAR
Temporary Australian
Not doubting things but are these "real" t28 or chinese copy. What specs are on the ones u know of .......Name names.ROAD_KILL wrote:i agree a disco potato would be more what you want it has good power and its not as laggy as a t3/t4 . but if you you go for the t28 i know a place that sells them brand spanking new for $500 each .KiwiBacon wrote:One T28 each side. Disco potato perhaps.
The minister for war and finance is going to hate that reply.
(thats if your in sydney)
Show me the money..SHOW ME THE MONEY
Road Ranger
A Disco Potato is just a pet name for one of Garrett's turbo's, the GT28RS Ball Bearing model.
SPECIFICATIONS:
Displacement range: 1.7-2.7L
Output Range 250-320 horsepower.
Compressor Wheel Diameters – 1.86â€
SPECIFICATIONS:
Displacement range: 1.7-2.7L
Output Range 250-320 horsepower.
Compressor Wheel Diameters – 1.86â€
[quote="RockyF70 - Coming out of the closet"]i'd be rushing out and buying an IFS rocky[/quote]
Temporary Australian
nah not one at a good price..... about 6 grand for a stage 2 kit to bolt directly to the 5 litre...... It's not too bad down low at the moment... and with the auto, in low range it is always working up around 2,000 rpm anyhow. I'd love a supercharger for it....... but it would cost me as much as a divorce lawyer..... so i would have to double the purchase priceTiny wrote:what happened to the supercharger idea? I thought you had a good option lined up at the right cost? wouldnt it be better to gain the low down power and torque than a turbo set up?
There is no "I" in Team, but there are 5 in Individual Brilliance
At the OBC recently was having a look at Phil Swindales new rig (or Manni's old one!) it runs a Terra Charger from memory or an Eaton M90 can't remember. Basically it looked like a carby valley with a custom adaptor with the charger sitting on top, simple but effective. It worked pretty well and seemed to ahve heaps of go, although I am sure that motor has had heaps of work done.
Temporary Australian
there is a blower kit on evilbay at the moment, it's up around $3,200 http://cgi.ebay.com.au/ws/eBayISAPI.dll ... &rd=1&rd=1
There is a turbo off a r32 skyline on there with a reasonable "buy it now" price...... not sure if i would get a high enough flow from that size.....
http://cgi.ebay.com.au/ws/eBayISAPI.dll ... &rd=1&rd=1
I'm in no real hurry at this point in time. A bit more research first.... then i'll make it happen later in the year when i settle into my new job and pay back some of the debts i incurred while i was out of work.
There is a turbo off a r32 skyline on there with a reasonable "buy it now" price...... not sure if i would get a high enough flow from that size.....
http://cgi.ebay.com.au/ws/eBayISAPI.dll ... &rd=1&rd=1
I'm in no real hurry at this point in time. A bit more research first.... then i'll make it happen later in the year when i settle into my new job and pay back some of the debts i incurred while i was out of work.
There is no "I" in Team, but there are 5 in Individual Brilliance
Yeah fair enough, nothing worse than having debt hanging over your head.
I wouldn't buy a kit if I were you. You can pick up an Eaton M90 charger off a commodaore of the like for around $600 if you are patient. Then get a carby valley for it. Then you would just need to get the adaptor made up, maybe you know someone who can fab one up for you.
I wouldn't buy a kit if I were you. You can pick up an Eaton M90 charger off a commodaore of the like for around $600 if you are patient. Then get a carby valley for it. Then you would just need to get the adaptor made up, maybe you know someone who can fab one up for you.
im not to sure what brand they are but i dont think they would be garret not that cheapRED60 wrote:Not doubting things but are these "real" t28 or chinese copy. What specs are on the ones u know of .......Name names.ROAD_KILL wrote:i agree a disco potato would be more what you want it has good power and its not as laggy as a t3/t4 . but if you you go for the t28 i know a place that sells them brand spanking new for $500 each .KiwiBacon wrote:One T28 each side. Disco potato perhaps.
The minister for war and finance is going to hate that reply.
(thats if your in sydney)
GQ CHOPPED TO EXTRA CAB UTE ,
38 SWAMPERS,
,6INCH LIFT, BUT ITS GOT TO GO TO FUND A NEW WORK CAR
38 SWAMPERS,
,6INCH LIFT, BUT ITS GOT TO GO TO FUND A NEW WORK CAR
Temporary Australian
from what i am told......... what ever i pay for the turbo, plus a hunjy or 3 to get the zorst and the oil line sorted...... I'm not looking for anything flashy or rice.... just 6 to 8 pounds of boost, non-intercooled.SLOGQ wrote:How much do you think a fully set up turbo is gona cost you, ive been down this road and a suoercharger always comes out on top....
There is no "I" in Team, but there are 5 in Individual Brilliance
Temporary Australian
that would work great!! just gotta find one!!KiwiBacon wrote:Another random thought.
The turbo from a 4L falcon might be a good start for what you want, there must be a lot of people out there who've upgraded and have one to hock off.
There is no "I" in Team, but there are 5 in Individual Brilliance
They don't get up graded that often being a 700hp capacity turboKiwiBacon wrote:Another random thought.
The turbo from a 4L falcon might be a good start for what you want, there must be a lot of people out there who've upgraded and have one to hock off.
but there may be a few in the wreckers though......Krimnl??
Custom Barwork
Cages built to CCDA specs
Turbo and intercooler systems for diesel and petrol.......PM me.
Centavic Performance 4WD
Cages built to CCDA specs
Turbo and intercooler systems for diesel and petrol.......PM me.
Centavic Performance 4WD
Who is online
Users browsing this forum: No registered users and 141 guests