Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

More turbo help........

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Temporary Australian
Posts: 6728
Joined: Fri Nov 28, 2003 7:45 am
Location: somewhere........ who knows where

More turbo help........

Post by Vulcanised »

a little advice needed on a turbo...... i'm not after high boost, or high rpm's. I'm looking at about 6-8psi, quick spool up, and work best between about 2,000 and 4,000 rpm on a 5.0 litre V8. A guy i was talking to, who is a mechanic seemed to think that something along the lines of a T3/T4 combo would work, but might run out of puff at high revs.... and if i run low boost, could do it fairly easily without a lot of modifications to my engine management. It already has a HSV chip in it.

I got the nod of approval from the Minister for War & Finance :D i just have to find me a turbo at the right price, and get it installed :cool:
There is no "I" in Team, but there are 5 in Individual Brilliance
Posts: 2158
Joined: Sat Jan 20, 2007 8:16 am
Location: New Zealand

Post by KiwiBacon »

One T28 each side. Disco potato perhaps.

The minister for war and finance is going to hate that reply. :D
Temporary Australian
Posts: 6728
Joined: Fri Nov 28, 2003 7:45 am
Location: somewhere........ who knows where

Post by Vulcanised »

i thought of one small one each side...... but takes a lot more work to install. the way the zorst runs..... it would be a piece of piss to run both pipes up to a turbo manifold and plumb the turbo straight into the throttle body
There is no "I" in Team, but there are 5 in Individual Brilliance
Posts: 1109
Joined: Mon Feb 12, 2007 8:48 pm
Location: Australia

Post by hulsty »

its its a holden v8 why not bolt on a yella terra terra charger kit? will do what you want, comes with fuel controller, injectors and all too, only thing is it's running a belt at the front of the motor which might require regular changing depending on ur conditions
Posts: 116
Joined: Sat Sep 30, 2006 10:03 pm
Location: sydney

Post by ROAD_KILL »

KiwiBacon wrote:One T28 each side. Disco potato perhaps.

The minister for war and finance is going to hate that reply. :D
i agree a disco potato would be more what you want it has good power and its not as laggy as a t3/t4 . but if you you go for the t28 i know a place that sells them brand spanking new for $500 each .
(thats if your in sydney)
GQ CHOPPED TO EXTRA CAB UTE ,
38 SWAMPERS,
,6INCH LIFT, BUT ITS GOT TO GO TO FUND A NEW WORK CAR
Temporary Australian
Posts: 6728
Joined: Fri Nov 28, 2003 7:45 am
Location: somewhere........ who knows where

Post by Vulcanised »

i might sound like a n00b...... but what is a disco potato?? :oops:
There is no "I" in Team, but there are 5 in Individual Brilliance
Posts: 1715
Joined: Tue Sep 06, 2005 8:38 pm
Location: at my wits end

Post by RED60 »

ROAD_KILL wrote:
KiwiBacon wrote:One T28 each side. Disco potato perhaps.

The minister for war and finance is going to hate that reply. :D
i agree a disco potato would be more what you want it has good power and its not as laggy as a t3/t4 . but if you you go for the t28 i know a place that sells them brand spanking new for $500 each .
(thats if your in sydney)
Not doubting things but are these "real" t28 or chinese copy. What specs are on the ones u know of .......Name names.
Show me the money..SHOW ME THE MONEY
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Post by Tiny »

what happened to the supercharger idea? I thought you had a good option lined up at the right cost? wouldnt it be better to gain the low down power and torque than a turbo set up?
If the above post did not offend you in any way please PM me so I can try harder!!
Posts: 3132
Joined: Wed Sep 28, 2005 3:22 pm
Location: Newy

Post by HotFourOk »

A Disco Potato is just a pet name for one of Garrett's turbo's, the GT28RS Ball Bearing model.

SPECIFICATIONS:
Displacement range: 1.7-2.7L
Output Range 250-320 horsepower.
Compressor Wheel Diameters – 1.86â€
[quote="RockyF70 - Coming out of the closet"]i'd be rushing out and buying an IFS rocky[/quote]
Temporary Australian
Posts: 6728
Joined: Fri Nov 28, 2003 7:45 am
Location: somewhere........ who knows where

Post by Vulcanised »

Tiny wrote:what happened to the supercharger idea? I thought you had a good option lined up at the right cost? wouldnt it be better to gain the low down power and torque than a turbo set up?
nah not one at a good price..... about 6 grand for a stage 2 kit to bolt directly to the 5 litre...... It's not too bad down low at the moment... and with the auto, in low range it is always working up around 2,000 rpm anyhow. I'd love a supercharger for it....... but it would cost me as much as a divorce lawyer..... so i would have to double the purchase price :lol: :lol:
There is no "I" in Team, but there are 5 in Individual Brilliance
Posts: 1781
Joined: Mon May 17, 2004 10:01 pm
Location: Geelong

Post by beretta »

At the OBC recently was having a look at Phil Swindales new rig (or Manni's old one!) it runs a Terra Charger from memory or an Eaton M90 can't remember. Basically it looked like a carby valley with a custom adaptor with the charger sitting on top, simple but effective. It worked pretty well and seemed to ahve heaps of go, although I am sure that motor has had heaps of work done.
Temporary Australian
Posts: 6728
Joined: Fri Nov 28, 2003 7:45 am
Location: somewhere........ who knows where

Post by Vulcanised »

there is a blower kit on evilbay at the moment, it's up around $3,200 http://cgi.ebay.com.au/ws/eBayISAPI.dll ... &rd=1&rd=1

There is a turbo off a r32 skyline on there with a reasonable "buy it now" price...... not sure if i would get a high enough flow from that size.....
http://cgi.ebay.com.au/ws/eBayISAPI.dll ... &rd=1&rd=1

I'm in no real hurry at this point in time. A bit more research first.... then i'll make it happen later in the year when i settle into my new job and pay back some of the debts i incurred while i was out of work.
There is no "I" in Team, but there are 5 in Individual Brilliance
Posts: 1781
Joined: Mon May 17, 2004 10:01 pm
Location: Geelong

Post by beretta »

Yeah fair enough, nothing worse than having debt hanging over your head.

I wouldn't buy a kit if I were you. You can pick up an Eaton M90 charger off a commodaore of the like for around $600 if you are patient. Then get a carby valley for it. Then you would just need to get the adaptor made up, maybe you know someone who can fab one up for you.
Posts: 116
Joined: Sat Sep 30, 2006 10:03 pm
Location: sydney

Post by ROAD_KILL »

RED60 wrote:
ROAD_KILL wrote:
KiwiBacon wrote:One T28 each side. Disco potato perhaps.

The minister for war and finance is going to hate that reply. :D
i agree a disco potato would be more what you want it has good power and its not as laggy as a t3/t4 . but if you you go for the t28 i know a place that sells them brand spanking new for $500 each .
(thats if your in sydney)
Not doubting things but are these "real" t28 or chinese copy. What specs are on the ones u know of .......Name names.
im not to sure what brand they are but i dont think they would be garret not that cheap :lol:
GQ CHOPPED TO EXTRA CAB UTE ,
38 SWAMPERS,
,6INCH LIFT, BUT ITS GOT TO GO TO FUND A NEW WORK CAR
Posts: 193
Joined: Sat Jul 10, 2004 6:11 pm
Location: Sunshine coast Queensland

Post by SLOGQ »

How much do you think a fully set up turbo is gona cost you, ive been down this road and a suoercharger always comes out on top....
Temporary Australian
Posts: 6728
Joined: Fri Nov 28, 2003 7:45 am
Location: somewhere........ who knows where

Post by Vulcanised »

SLOGQ wrote:How much do you think a fully set up turbo is gona cost you, ive been down this road and a suoercharger always comes out on top....
from what i am told......... ;) what ever i pay for the turbo, plus a hunjy or 3 to get the zorst and the oil line sorted...... I'm not looking for anything flashy or rice.... just 6 to 8 pounds of boost, non-intercooled.
There is no "I" in Team, but there are 5 in Individual Brilliance
Posts: 193
Joined: Sat Jul 10, 2004 6:11 pm
Location: Sunshine coast Queensland

Post by SLOGQ »

That sounds great, i hope you can pull it off mate, take a few pics for us hey ;)
Posts: 2158
Joined: Sat Jan 20, 2007 8:16 am
Location: New Zealand

Post by KiwiBacon »

Another random thought.

The turbo from a 4L falcon might be a good start for what you want, there must be a lot of people out there who've upgraded and have one to hock off.
Temporary Australian
Posts: 6728
Joined: Fri Nov 28, 2003 7:45 am
Location: somewhere........ who knows where

Post by Vulcanised »

KiwiBacon wrote:Another random thought.

The turbo from a 4L falcon might be a good start for what you want, there must be a lot of people out there who've upgraded and have one to hock off.
that would work great!! just gotta find one!!
There is no "I" in Team, but there are 5 in Individual Brilliance
Posts: 543
Joined: Fri Nov 08, 2002 9:40 pm
Location: Hicksville, Cent Vic...No the other one!

Post by Juzza »

KiwiBacon wrote:Another random thought.

The turbo from a 4L falcon might be a good start for what you want, there must be a lot of people out there who've upgraded and have one to hock off.
They don't get up graded that often being a 700hp capacity turbo
but there may be a few in the wreckers though......Krimnl??
Custom Barwork
Cages built to CCDA specs
Turbo and intercooler systems for diesel and petrol.......PM me.
Centavic Performance 4WD
Post Reply

Who is online

Users browsing this forum: No registered users and 38 guests