Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Milford Cargo Barrier in 100 Series - Help

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 1245
Joined: Fri May 02, 2003 4:28 pm
Location: Kyrgyzstan

Milford Cargo Barrier in 100 Series - Help

Post by me3@neuralfibre.com »

Does anyone have a Milford Cargo barrier fitted to their 100 series? If yes, could you tell me what it mounts to. I picked one up second hand for a reasonable price, but get a nasty feeling I may need to a fitting kit to add mount points. I am starting to think it doesn't mount to the factory handles etc.

Any help appreciated

Thanx
Paul
Lexus LX470 - hrrm Winter Tyres
Gone - Cruiser HZJ105 Turbo'd Locked & Lifted
Gone - 3L Surf
Posts: 1889
Joined: Mon Sep 20, 2004 10:23 pm
Location: Brisbane

Post by just cruizin' »

My mounting points were all done by the installer. The top mounts are inbetween the factory handle holes, my handles are still fitted, bit of a bugger to remove the barrier though. Bottom mounts are between the child seat strap mounts from memory, the barrier sits almost on the join of the carpet.
User avatar
yfz
Posts: 24
Joined: Sun Jan 14, 2007 1:58 pm
Location: Port Hedland W.A

Post by yfz »

You will need the kit to suit and the instructions as holes need to be drilled and mounts fitted.
2005 TD GXL 100

2004 Hilux, 4" Procomp Lift, 2" Body Lift on 35" MTRs ... SOLD!!!
Posts: 82
Joined: Sun Jun 04, 2006 5:12 pm
Location: Illawarra, NSW

Post by BEU77y »

We had this very same problem. The mount kit is worth around $115 from memory.
Posts: 39
Joined: Tue Apr 24, 2007 9:48 pm
Location: STH-EAST MELB

Post by CRUIZED »

Have fun fitting it yourself I fittied my own -prick of a job drilling a hole in the upper shell between the handles and then getting the backing plate in the right place Took me about 5 hours and a lota swearing First side took about 4hrs when I worked it out the second side took 1 hr
I would pay someone too install it as Im sure they done it a 1000 times and the could do it with their eyes closed!!!!!!! :lol: :lol: :lol:
Posts: 382
Joined: Fri Dec 06, 2002 8:15 pm
Location: Diamond Creek

Post by DNA Off Road »

BEU77y wrote:We had this very same problem. The mount kit is worth around $115 from memory.
You should be able to get the fitting kit for $80

Cheers
Stock 'Cruiser X 2
www.dnaoffroad.com.au
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests