Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

60 series Bullbar.

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 46
Joined: Sat Jul 21, 2007 3:33 pm
Location: Brisbane, QLD

60 series Bullbar.

Post by fourby »

G'day all,

Just wondering if it is illegal to remove the front bullbar of a 60 series?
Although this may sound weird, I was told It was illegal as the chassis rails protrude out from the length of the bonnet.

Any idea's?
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

Pedestrian catchers :D mate it wouldn'd surprise me it's Qld i'd say you'd at least need something between them
plenty of parts on the bench
Posts: 46
Joined: Sat Jul 21, 2007 3:33 pm
Location: Brisbane, QLD

Post by fourby »

hrmm not sure, anyone know?
Posts: 1489
Joined: Wed Jan 21, 2004 4:13 pm
Location: Brisbane South. QLD

Post by G_loomis »

Its called "protruding chassis rail" and yes its illegal!
L.S Canvas & P.V.C
www.lscanvas.com.au
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

did you really think it would be legal?
Posts: 422
Joined: Wed Nov 22, 2006 1:47 pm
Location: surf coast, victoria

Post by cruiser60series »

ive seen a few driving around with the chassis rails sticking out but i've also seen one with the rails cut off flush with the body. looked pretty shmick. I don't know if it was illegal or not but these guys didn't seem to care.
At first I thought it was a sea anemone, upon closer inspection I realised it was a funky ball of tits from outer space.
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

cruiser60series wrote:ive seen a few driving around with the chassis rails sticking out but i've also seen one with the rails cut off flush with the body. looked pretty shmick. I don't know if it was illegal or not but these guys didn't seem to care.
any protruding edges etc are illegal.

if its cut off flush and theres no sharp edges, everything is radius'd and the tyre is adequately covered then its perfectly legal.
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Post by bj on roids »

shadow has captured it :cool:
hands and mums dont count!!!
Posts: 1083
Joined: Tue Apr 26, 2005 12:08 pm
Location: Toowoomba

Post by Guy From Nowhere »

The tyre does not have to adeqautely covered at all. When the standard bumper is on the 60 series it does cover some tyre. However, atube bar, engineered and passed, that is on a 60 I have seen is one small bar that passes around the front only to protect the bottom of the front grill. The tyres aren't covered at all and no roadworthy issues were raised.
[quote="MissForbyNooB"] I've played with you AND your missus. [/quote]
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

Guy From Nowhere wrote:The tyre does not have to adeqautely covered at all. When the standard bumper is on the 60 series it does cover some tyre. However, atube bar, engineered and passed, that is on a 60 I have seen is one small bar that passes around the front only to protect the bottom of the front grill. The tyres aren't covered at all and no roadworthy issues were raised.
there is a requirement in the adr that the wheel be covered to something like 45degrees infront of it

its likely that the fender etc already does this. I was stating in general what the requirements are, not what they are specifically for a 60 series.
Posts: 46
Joined: Sat Jul 21, 2007 3:33 pm
Location: Brisbane, QLD

Post by fourby »

thanks guys, question answered
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests