Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
60 series Bullbar.
Moderators: toaddog, Elmo, DUDELUX
60 series Bullbar.
G'day all,
Just wondering if it is illegal to remove the front bullbar of a 60 series?
Although this may sound weird, I was told It was illegal as the chassis rails protrude out from the length of the bonnet.
Any idea's?
Just wondering if it is illegal to remove the front bullbar of a 60 series?
Although this may sound weird, I was told It was illegal as the chassis rails protrude out from the length of the bonnet.
Any idea's?
ive seen a few driving around with the chassis rails sticking out but i've also seen one with the rails cut off flush with the body. looked pretty shmick. I don't know if it was illegal or not but these guys didn't seem to care.
At first I thought it was a sea anemone, upon closer inspection I realised it was a funky ball of tits from outer space.
any protruding edges etc are illegal.cruiser60series wrote:ive seen a few driving around with the chassis rails sticking out but i've also seen one with the rails cut off flush with the body. looked pretty shmick. I don't know if it was illegal or not but these guys didn't seem to care.
if its cut off flush and theres no sharp edges, everything is radius'd and the tyre is adequately covered then its perfectly legal.
The tyre does not have to adeqautely covered at all. When the standard bumper is on the 60 series it does cover some tyre. However, atube bar, engineered and passed, that is on a 60 I have seen is one small bar that passes around the front only to protect the bottom of the front grill. The tyres aren't covered at all and no roadworthy issues were raised.
[quote="MissForbyNooB"] I've played with you AND your missus. [/quote]
there is a requirement in the adr that the wheel be covered to something like 45degrees infront of itGuy From Nowhere wrote:The tyre does not have to adeqautely covered at all. When the standard bumper is on the 60 series it does cover some tyre. However, atube bar, engineered and passed, that is on a 60 I have seen is one small bar that passes around the front only to protect the bottom of the front grill. The tyres aren't covered at all and no roadworthy issues were raised.
its likely that the fender etc already does this. I was stating in general what the requirements are, not what they are specifically for a 60 series.
Who is online
Users browsing this forum: No registered users and 119 guests